gnupic@linuxhacker.org

Subject: icd programming error
From: Eric N.
Date: 05 Jun 2003 22:20:57 -0400
Geir,

Not really sure what the problem is but some help would be appreciated. 
(for the list) This output is from icdprog.

----- Device configuration: -----
Oscillator selection bits: RC
Watchdog timer:  disabled
Power up timer:  enabled
Brown out reset: enabled
Low voltage programming: enabled
EE data code protection: off
Flash memory write: ok
Code protection: off
baud rate init ok
Error 
ICD firmware version: 2.04.FFFFFFFF
Error 
Error 
Error 
Error 
Vcc = 107374182.38V, Vpp = 22.67V
Error 
Unknown controller, device id = FFFFFFFF
Error 
Erasing device ...
Error 
Error erasing device
Programming flash memory
Error 
Error 
programming error (address init)
Error 
programming error (address)
programming: 0x0000 = 0x0000
Error 
programming error (data)
programming: 0x0001 = 0x1283
Error 
programming error (data)
programming: 0x0002 = 0x1303
Error 
programming error (data)
programming: 0x0003 = 0x0187
Error 
programming error (data)
programming: 0x0004 = 0x3041
Error 
programming error (data)
programming: 0x0005 = 0x009F
Error 
programming error (data)
programming: 0x0006 = 0x1683
Error 
programming error (data)
programming: 0x0007 = 0x1303
Error 
programming error (data)
programming: 0x0008 = 0x3087
Error 
programming error (data)
programming: 0x0009 = 0x0081
Error 
programming error (data)
programming: 0x000A = 0x0187
Error 
programming error (data)
programming: 0x000B = 0x300E
Error 
programming error (data)
programming: 0x000C = 0x009F
Error 
programming error (data)
programming: 0x000D = 0x1283
Error 
programming error (data)
programming: 0x000E = 0x1303
Error 
programming error (data)
programming: 0x000F = 0x1D0B
Error 
programming error (data)
programming: 0x0010 = 0x280F
Error 
programming error (data)
programming: 0x0011 = 0x110B
Error 
programming error (data)
programming: 0x0012 = 0x151F
Error 
programming error (data)
programming: 0x0013 = 0x1F0C
Error 
programming error (data)
programming: 0x0014 = 0x2813
Error 
programming error (data)
programming: 0x0015 = 0x081E
Error 
programming error (data)
programming: 0x0016 = 0x0087
Error 
programming error (data)
programming: 0x0017 = 0x0187
Error 
programming error (data)
programming: 0x0018 = 0x1C06
Error 
programming error (data)
programming: 0x0019 = 0x2818
Error 
programming error (data)
programming: 0x001A = 0x0087
Error 
programming error (data)
programming: 0x001B = 0x280F
Error 
programming error (data)
Programming id locations and configuration word
Error 
programming error (id_loc address init)
Error 
programming error (id_loc address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (increment address)
Error 
programming error (data)
Error