plustek@linuxhacker.org

Hi,

put the blame on me! I should point out, that pt drv is ONLY needed
for PARALLEL port scanner. The USB stuff is already in the SANE
distro included.
First step for you will be to load the USB subsystem including the
scanner module.
And then I'm afraid  there's currently no support for the 2300c.
If this device is compatible to the 2200c, then it should be no
problem to make it work, but that might be your job to find  this
out. Can you send us the product id (see cat /proc/bus/usb/devices)..

Gerhard

On Donnerstag, 17. Oktober 2002 02:10, Joal Heagney wrote:
> Hi. Recently I bought a hp 2300c usb scanner, and I suspect it might
> work with the plustek plugin. However, when I'm setting up for usb, do
> I have to ensure that the pt dev.o driver is loaded (as well as
> usbscanenr). If so, what do I set the port= option to? I kind of
> thought that pointed to a parallel port.
>
> You see, I'm a little bit vauge about usb - does the driver add support
> of plustek devices to the usbscanner kernel module, or does it rely on
> code in the usbscanner module.
>
> Thank you for your help
>
> Joal Heagney/BCDragon