plustek@linuxhacker.org

Hi Michael,

remove the umax_pp entry, and edit plustek.conf that way, that
device points to /dev/usb/scanner0. Also make sure to have
read/write access to this device from your user account...

Gerhard

BTW: no need to send the mails twice, the mailing list is enough ;-)


On Monday, 18. November 2002 18:37, Michael D. Spiceland wrote:
> sane-find-scanner now works, but still problems!  The only thing I
> changed was passing it the vender and product  using modules.conf
> instead of on command line, but sane-find-scanner now works!
>
> sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0505)
> at device /dev/usb/scanner0
>
> The problem is that scanimage -L doesn't find it:
>
> [root@fuzzymonkey mike]# scanimage -L
> [umax_pp_low] TestVersion(0) (umax_pp_low.c:4412) failed ...
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
> Is this due to an incorrectly setup dll.conf as you said?  I put plustek
> on that file ... is there somethign else I should do?
>
> Thanks,
> Michael
>