plustek@linuxhacker.org

Hi,
I got a problem with my Plustek OpticPro 9636P
when I try a modprobe pt_drv i obtain : 

/lib/modules/2.4.19-16mdk/kernel/drivers/parport/pt_drv.o: init_module:
Success
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/parport/pt_drv.o failed
modprobe: insmod pt_drv failed

and when i look at the /etc/modules.conf, all seems ok : 

alias char-major-40	pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv port=0x378 lampoff=180 warmup=30 lOffonEnd=0 mov=4
slowIO=0 forceMode=0

and on syslog : 

kernel: devfs_mk_dir(scanner): using old entry in dir: e3fed5c0 ""
kernel: pt_drv : driver version 0.42-10
kernel: pt_drv : no device(s) detected, (-9020)

(i precise that my scanner is connected and under tension on the only
parallel port i got)

Thanks for your help

Matao