plustek@linuxhacker.org

Hi,

what's the output of sane-findscanner?
Is Plustek enabled in /etc/sane.d/dll.conf?
Try the following plustek.conf:
[usb]
device auto

Enable the backend debug output and send it to us:
SANE DEBUG PLUSTEK=12 ; scanimage -L

Cheers
  Gerhard


On Donnerstag, 6. Februar 2003 05:05, Bret Comstock Waldow wrote:
> Hi,
>
> I downloaded, made, and installed sane 1.0.10.  I made the configuration
> changes (below) in /etc/sane.d/plustek.conf.
>
> I even rebooted.
>
> xsane says there's no scanner. cat /proc/bus/usb/devices says there is
> (as below).
>
> What now?
>
> Thanks in advance,
> Bret
>
> On Tue, 2003-02-04 at 07:56, Gerhard Jaeger wrote:
> > Hi,
> >
> > On Montag, 3. Februar 2003 22:07, Bret Comstock Waldow wrote:
> > [SNIPSNAP]
> >
> > > I've made the module and installed it from
> > > plustek-module-0 42 9.tar.gz.  There were no errors reported and the
> > > build completed as did "make install".
> >
> > see Eriks' mail! Only needed for the parallelport devices!!!
> >
> > > Here are some things I think would be relevant from what I've read:
> > > [root@ganesha temp]# cat /etc/modules.conf
> > >
> > > # for Canonscan LiDE 20
> > > options scanner vendor=0x04a9 product=0x220d
> >
> > looks okay!
> >
> > > [root@ganesha plustek driver]# rpm --query sane-backends
> > > sane-backends-1.0.8-5
> > > [root@ganesha plustek driver]# rpm --query sane-frontends
> > > sane-frontends-1.0.8-4
> >
> > Here's the problem, you'll need SANE-1.0.10!!!!
> >
> > Cheers
> >   Gerhard
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
> > For additional commands, e-mail: plustek-help@linuxhacker.org