plustek@linuxhacker.org

Hi,

the problems you have are exactly the same that you had with your previous
installation - so all of the hints apply here too. It has something to do with
EPP and IEEE1248 stuff... - Check your older requests and answers please.

Gerhard

On Samstag, 22. März 2003 15:09, Heiko Schmidt-Evers wrote:
> Hi,
>
> The scanner already worked, but now i had to reinstall everything and now
> i'm having problems again. Now i have SuSE 8.1. sane version: 1.0.8
> No error messages to this point.
>
> linux:/home/heiko/scanner/plustek driver # make load
> /sbin/modprobe pt drv || exit 1
> /lib/modules/2.4.19-4GB/misc/pt drv.o: init module: Success
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.19-4GB/misc/pt drv.o: insmod
> /lib/modules/2.4.19-4GB/misc/pt drv.o failed
> /lib/modules/2.4.19-4GB/misc/pt drv.o: insmod pt drv failed
> make: *** [load] Fehler 1
> linux:/home/heiko/scanner/plustek driver # dmesg
> [...]
> *********************************************
> pt drv: init module()
> pt drv : driver version 0.41-6
> ProcFsInitialize()
> ptdrvInit(0)
> Init settings done
> ScanData = 0xcbb00000
> Using fast I/O
> Requested port at 0x378
> Requested port (0x378) found
> Port mode reported: (0x0047)
> Port for device 0 registered
> ptdrvOpen(port=0x378)
> Try to claim the parport
> parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
> Using EPP-mode
> Starting Scanner-Autodetection
> ************ DETECTP48xx ************
> ModelSet4800()
> modelInitPageSettings()
> A4 set
> ModelSet4800() done.
> P48xxInitAsic()
> DacInitialize()
> ImageInitialize()
> IOFuncInitialize()
> IOInitialize()
> MotorInitialize()
> Dataport = 0x0378
> Ctrlport = 0x037a
> Test 0x55
> Test 0xAA
> Compare data=0x7e and status=0x1e, port=0x378
> p48xxReadWriteTest()
> Can't find your model, asic = 0x11
> detectScannerConnection() returns -9031.
> ************* ASIC9800x *************
> IOInitialize()
> ASIC = 0x11
> Unknown ASIC-ID
> *** DETECTION DONE, result: -9020 ***
> ptdrvClose()
> MiscRestorePort()
> - no need to restore portmode !
> Releasing parport
> ptdrvShutdown()
> cleanup device 0
> Port unregistered
> ProcFsShutdown()
> pt drv: proc del 'info' root='pt drv'
> pt drv: proc del 'pt drv' root='/proc'
> pt drv : no device(s) detected, (-9020)
> ---------------------------------------------
> linux:/home/heiko/scanner/plustek driver #
>
> Yesterday, the light switched on, but did not switch off. The next time i
> tried it, the light did not switch on. I tried different configurations for
> modules.conf, which i read in the mailing list archive.
>
> What can i do?
>
> Heiko.
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
> For additional commands, e-mail: plustek-help@linuxhacker.org