plustek@linuxhacker.org

Maximilian Rixius wrote:

>Hi,
>
>after exchaning my antique 486 board for a new Athlon Box I can't detect my 
>scanner any more, although the ASIC seems to be found. Thus the module won't, 
>but the lamp gets switched on. The same scanner worked fine before (apart 
>from corrupted images at higher resolutions). - What can I do to find out 
>what's going wrong?
>
>Board: K7VM2 board w/ Athlon XP 2000+, 256MB
>Linux: SuSE 8.0, Kernel 2.4.18-4GB
>Driver: 0.42.9 (think I used the same before, but can't check any more)
>Debug output: attached
>
>  Maxl 
>
>     -----------------------------------------------------------------------
>     _/ _/ _/ _/    maximilian o. rixius     rixius @ tiscali.de     f 2 1 c 
>    _/ _/ _/ _/   ______________________    + 49 241 20201  @ home   4 9 a 7 
>   _/ _/ _/ _/                              horngasse 12 3rd floor   8 5 6 b 
>  _/ _/ _/ _/  i don't disclaim anything    52064 aachen (germany)   3 e d 0 
> ---------------------------------------------------------------------------
>  
>
>------------------------------------------------------------------------
>
>Jun  4 22:24:43 pinguin kernel: ---------------------------------------------
>Jun  4 22:42:36 pinguin kernel: *********************************************
>Jun  4 22:42:36 pinguin kernel: pt_drv: init_module()
>Jun  4 22:42:36 pinguin kernel: pt_drv : driver version 0.42-10
>Jun  4 22:42:36 pinguin kernel: ProcFsInitialize()
>Jun  4 22:42:36 pinguin kernel: ptdrvInit(0)
>Jun  4 22:42:36 pinguin kernel: Init settings done
>Jun  4 22:42:36 pinguin kernel: ScanData = 0xcc530000
>Jun  4 22:42:36 pinguin kernel: Using fast I/O
>Jun  4 22:42:36 pinguin kernel: Requested port at 0x378
>Jun  4 22:42:36 pinguin kernel: Requested port (0x378) found
>Jun  4 22:42:36 pinguin kernel: Port mode reported: (0x0047)
>Jun  4 22:42:36 pinguin kernel: Port for device 0 registered
>Jun  4 22:42:36 pinguin kernel: ptdrvOpen(port=0x378)
>Jun  4 22:42:36 pinguin kernel: Try to claim the parport
>Jun  4 22:42:36 pinguin kernel: parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
>Jun  4 22:42:36 pinguin kernel: Using EPP-mode
>Jun  4 22:42:36 pinguin kernel: Starting Scanner-Autodetection
>Jun  4 22:42:36 pinguin kernel: ************ DETECTP48xx ************
>Jun  4 22:42:36 pinguin kernel: ModelSet4800()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4800() done.
>Jun  4 22:42:36 pinguin kernel: P48xxInitAsic()
>Jun  4 22:42:36 pinguin kernel: DacInitialize()
>Jun  4 22:42:36 pinguin kernel: ImageInitialize()
>Jun  4 22:42:36 pinguin kernel: IOFuncInitialize()
>Jun  4 22:42:36 pinguin kernel: IOInitialize()
>Jun  4 22:42:36 pinguin kernel: MotorInitialize()
>Jun  4 22:42:36 pinguin kernel: Dataport = 0x0378
>Jun  4 22:42:36 pinguin kernel: Ctrlport = 0x037a
>Jun  4 22:42:36 pinguin kernel: Test 0x55
>Jun  4 22:42:36 pinguin kernel: Test 0xAA
>Jun  4 22:42:36 pinguin kernel: Compare data=0x7f and status=0xf, port=0x378
>Jun  4 22:42:36 pinguin kernel: p48xxReadWriteTest()
>Jun  4 22:42:36 pinguin kernel: Found a 96003 ASIC at Reg 0x13
>Jun  4 22:42:36 pinguin kernel: ModelSet4830()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4830() done.
>Jun  4 22:42:36 pinguin kernel: p48xxDoTest()
>Jun  4 22:42:36 pinguin kernel: Bank 0 overwritten
>Jun  4 22:42:36 pinguin kernel: found 0 bytes of memory
>Jun  4 22:42:36 pinguin kernel: No memory ! No scanner...
>Jun  4 22:42:36 pinguin kernel: p48xxReadWriteTest()
>Jun  4 22:42:36 pinguin kernel: Found a 96003 ASIC at Reg 0x13
>Jun  4 22:42:36 pinguin kernel: ModelSet4830()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4830() done.
>Jun  4 22:42:36 pinguin kernel: p48xxDoTest()
>Jun  4 22:42:36 pinguin kernel: Bank 0 overwritten
>Jun  4 22:42:36 pinguin kernel: found 0 bytes of memory
>Jun  4 22:42:36 pinguin kernel: No memory ! No scanner...
>Jun  4 22:42:36 pinguin kernel: p48xxReadWriteTest()
>Jun  4 22:42:36 pinguin kernel: Found a 96003 ASIC at Reg 0x13
>Jun  4 22:42:36 pinguin kernel: ModelSet4830()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4830() done.
>Jun  4 22:42:36 pinguin kernel: p48xxDoTest()
>Jun  4 22:42:36 pinguin kernel: Bank 0 overwritten
>Jun  4 22:42:36 pinguin kernel: found 0 bytes of memory
>Jun  4 22:42:36 pinguin kernel: No memory ! No scanner...
>Jun  4 22:42:36 pinguin kernel: p48xxReadWriteTest()
>Jun  4 22:42:36 pinguin kernel: Found a 96003 ASIC at Reg 0x13
>Jun  4 22:42:36 pinguin kernel: ModelSet4830()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4830() done.
>Jun  4 22:42:36 pinguin kernel: p48xxDoTest()
>Jun  4 22:42:36 pinguin kernel: Bank 0 overwritten
>Jun  4 22:42:36 pinguin kernel: found 0 bytes of memory
>Jun  4 22:42:36 pinguin kernel: No memory ! No scanner...
>Jun  4 22:42:36 pinguin kernel: p48xxReadWriteTest()
>Jun  4 22:42:36 pinguin kernel: Found a 96003 ASIC at Reg 0x13
>Jun  4 22:42:36 pinguin kernel: ModelSet4830()
>Jun  4 22:42:36 pinguin kernel: modelInitPageSettings()
>Jun  4 22:42:36 pinguin kernel: A4 set
>Jun  4 22:42:36 pinguin kernel: ModelSet4830() done.
>Jun  4 22:42:36 pinguin kernel: p48xxDoTest()
>Jun  4 22:42:36 pinguin kernel: Bank 0 overwritten
>Jun  4 22:42:36 pinguin kernel: found 0 bytes of memory
>Jun  4 22:42:36 pinguin kernel: No memory ! No scanner...
>Jun  4 22:42:36 pinguin kernel: detectScannerConnection() returns -9020.
>Jun  4 22:42:36 pinguin kernel: ************* ASIC9800x *************
>Jun  4 22:42:36 pinguin kernel: IOInitialize()
>Jun  4 22:42:36 pinguin kernel: ASIC = 0x10
>Jun  4 22:42:36 pinguin kernel: Unknown ASIC-ID
>Jun  4 22:42:36 pinguin kernel: *** DETECTION DONE, result: -9020 ***
>Jun  4 22:42:36 pinguin kernel: ptdrvClose()
>Jun  4 22:42:36 pinguin kernel: MiscRestorePort()
>Jun  4 22:42:36 pinguin kernel: - no need to restore portmode !
>Jun  4 22:42:36 pinguin kernel: Releasing parport
>Jun  4 22:42:36 pinguin kernel: ptdrvShutdown()
>Jun  4 22:42:36 pinguin kernel: cleanup device 0
>Jun  4 22:42:36 pinguin kernel: Port unregistered
>Jun  4 22:42:36 pinguin kernel: ProcFsShutdown()
>Jun  4 22:42:36 pinguin kernel: pt_drv: proc del 'info' root='pt_drv'
>Jun  4 22:42:36 pinguin kernel: pt_drv: proc del 'pt_drv' root='/proc'
>Jun  4 22:42:36 pinguin kernel: pt_drv : no device(s) detected, (-9020)
>Jun  4 22:42:36 pinguin kernel: ---------------------------------------------
>
>  
>
>------------------------------------------------------------------------
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
>For additional commands, e-mail: plustek-help@linuxhacker.org
>
This is the exact same error I get on my machine -- no device detected 
(-9020).  My bios has only two parallel port modes, that being either 
PS/2, or AT.  It does not have EPP.  I'm thinking this maybe the problem 
on my machine.  I'm going to try to update my bios.  Perhaps your bios 
settings are similar.  If you have the option of EPP for your bios 
settings, try to set it there, and perhaps it will work.