plustek@linuxhacker.org

Hi,

checkout the following list entries, they might solve your problem:

http://www.linuxhacker.org/cgi-bin/ezmlm-cgi?3:mss:2295:200306:mhfjoddcomeckogblfnl

http://www.linuxhacker.org/cgi-bin/ezmlm-cgi?3:mss:2298:200306:klojejanm

and set your parport to EPP
Gerhard

On Dienstag, 10. Juni 2003 11:33, GUILLAUMIN OLIVIER wrote:
> Hello list,
>
> After upgrading from mandrake 9.0 to 9.1, i am not able to load pt_drv
> module.
>
> I've rechecked my parallel port settings, it's set as "Normal".
> (the other choices are EPP, ECP, EPP+ECP)
>
> module.conf file contain the lines as describe in the doc.
>
> Although i suspect a problem in the parallel port mode.
>
> I've join a log copy  when trying to load the module.
>
> Any help would be apreciated.
>
> Olivier
>
> PS : the lamp is switching on when i "make load"
>
> <begin log copy>
> pt_drv : driver version 0.42-10
> pt_drv : no device(s) detected, (-9020)
> *********************************************
> pt_drv: init_module()
> devfs_mk_dir(scanner): using old entry in dir: c158b5c0 ""
> pt_drv : driver version 0.42-10
> ProcFsInitialize()
> ptdrvInit(0)
> Init settings done
> ScanData = 0xd9664000
> Using fast I/O
> Requested port at 0x378
> Requested port (0x378) found
> Port mode reported: (0x0045)
> Port for device 0 registered
> ptdrvOpen(port=0x378)
> Try to claim the parport
> parport-modi: SPP EPP EPP(ECP)
> Using EPP-mode
> Starting Scanner-Autodetection
> ************ DETECTP48xx ************
> ModelSet4800()
> modelInitPageSettings()
> A4 set
> ModelSet4800() done.
> P48xxInitAsic()
> DacInitialize()
> ImageInitialize()
> IOFuncInitialize()
> IOInitialize()
> MotorInitialize()
> Dataport = 0x0378
> Ctrlport = 0x037a
> Test 0x55
> Test 0xAA
> Compare data=0x78 and status=0x8, port=0x378
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> detectScannerConnection() returns -9020.
> ************* ASIC9800x *************
> IOInitialize()
> ASIC = 0xE0
> Unknown ASIC-ID
> *** DETECTION DONE, result: -9020 ***
> ptdrvClose()
> MiscRestorePort()
> - no need to restore portmode !
> Releasing parport
> ptdrvShutdown()
> cleanup device 0
> Port unregistered
> ProcFsShutdown()
> pt_drv: proc del 'info' root='pt_drv'
> pt_drv: proc del 'pt_drv' root='/proc'
> pt_drv : no device(s) detected, (-9020)
> ---------------------------------------------
> <end log copy>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
> For additional commands, e-mail: plustek-help@linuxhacker.org