plustek@linuxhacker.org

Hi,

it seems, that at least on e guy had some problems similar to yours
with his EPSON. The latest release 0.45-7 on gjaeger.de fixes this,
maybe it fixes also your problem...

Ciao
  Gerhard

On Montag, 4. August 2003 09:35, fl00 wrote:
> I stepped back to sane 1.0.11 and my scanner is working again.... So I'm
> sure something is wrong with 1.0.12... But what??
>
> Am Dienstag, 29. Juli 2003 14:12 schrieben Sie:
> > Hi,
> > I had my canon n670u working with the sane backend 1.0.11 on SuSE 8.1.
> > Now I switched to 1.0.12 (hoping image quality was improved). I also
> > switched from kernel module to libusb and changed /proc/bus/usb/...
> > permissions via hotplug. Well, shouldn't matter...
> > My scanner is detected, however when starting a scan, after doing some
> > noises, the scanner dies. Switching on debug output with scanimage, I
> > found following output (see below). Is there a bug in the current
> > backend? Could libusb have something to do with it? Have I to adjust some
> > values in plustek.conf?
> >
> > Thanks for any help.
> > Greetings, Flo
> >
> > (...)
> > [plustek] Settings done, so start...
> > [plustek] usb SetScanParameters()
> > [plustek] * HDPI: 1.000
> > [plustek] * XDPI=600, HDPI=1.000
> > [plustek] * DataPixelStart=74, LineEnd=5174
> > [plustek] >> End-Start=5100, HDPI=1.00
> > [plustek] * Full Steps to Skip at Start = 0x0000
> > [plustek] usb GetMCLKDivider()
> > [plustek] * Integration Time Adjust = 0 (HDPI=1.000,MCLKD=6.000)
> > [plustek] * Current MCLK Divider = 6.000000
> > [plustek] * MOTOR-Settings: PWM=0x08, PWM DUTY=0x1f
> > [plustek] * PhyBytes   = 30606
> > [plustek] * PhyLines   = 1
> > [plustek] * TotalBytes = 91818
> > [plustek] * PL=230, coeffsize=192, scaler=3
> > [plustek] * PauseLimit = 90, [0x4e] = 0x2b, [0x4f] = 0x01
> > [plustek] usb SetScanParameters() done.
> > [plustek] Warmup: skipped for CIS devices
> > [plustek] usb ScanBegin()
> > [plustek] usb IsDataAvailableInDRAM()
> > [plustek] NO Data available
> > [plustek] Nothing to read...
> > [plustek] usb AdjustGain() failed
> > [plustek] Coarse Calibration failed!!!
> > [plustek] calibration failed!!!
> > [plustek] read failed, status = -9007, errno 2
> > [plustek] reader process done, status = 9
> > [plustek] Child is down (signal=17)
> > [plustek] drvclose()
> > [plustek] TIME END 1: 32s
> > (...)
>
> -------------------------------------------------------
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
> For additional commands, e-mail: plustek-help@linuxhacker.org