plustek@linuxhacker.org

plustek@linuxhacker.org


Subject: Plustek OpticSlim 1200
From: Klaus Blau
Date: Mon, 20 Oct 2003 20:01:52 +0200

Hello,

I'm new in that stuff. With my Suse8.2 Distri and sane 1.0.10 it should work. 
Can I get help What I did :

root@duck# sane_find_scanner -> 
found USB scanner (vendor=0x07b3, product=0x0413) at libusb:002:002
  # A USB device was detected. This program can't be sure if it's really
  # a scanner. If it is your scanner, it may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.
___________________________________________
root@duck# cat /proc/bus/usb/device ->
...
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07b3 ProdID=0413 Rev= 5.01
S:  Product=600dpi USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
...
___________________________________________________
root@duck# sanimage -L ->
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
_____________________________________________________
root@duck# less /etx/sane.d/dll.conf ->
#
#
# SANE Dynamic library loader config
# written by YaST2, Tue Oct 14 15:31:08 2003
#
gt68xx

# EOF
______________________________________________
root@duck# less /etc/sane.d/gt68xx.conf ->
# gt68xx.conf: Configuration file for GT68XX based scanners
# Read man sane-gt68xx for documentation
# Modifiziert am 17.10.2003 von Klaus Blau

##############################################################################
# Autodetect Plustek OpticPro 1248U
usb 0x07b3 0x0413

override "Plustek OpticPro 1248U"
firmware "/etc/sane.d/Cism216.fw"
vendor "Plustek"
model "OpticSlim 1200"
______________________________________________
What did I miss ? What else is to be done ?
Thanks for all help.

Best Regards
K. Blau
k.blau@web.de

plustek@linuxhacker.org