plustek@linuxhacker.org

Hey there all.  I need help with a USB UMAX Scanner 3400
Shows as x1606, x0060   
USB and Kernel scanner.o is OK.  /proc/usb shows good.  -Here is output 
of a "scanimage -L" : 

[plustek] usb_GetMCLKDivider()
[plustek] * Integration Time Adjust = 2 (HDPI=1.000,MCLKD=3.500)
[plustek] * Current MCLK Divider = 3.500000
[plustek] * MOTOR-Settings: PWM=0x10, PWM_DUTY=0x04
[plustek] * PhyBytes   = 30602
[plustek] * PhyLines   = 1
[plustek] * TotalBytes = 30602
[plustek] * PL=200, coeffsize=192, scaler=1
[plustek] * PauseLimit = 30, [0x4e] = 0x0d, [0x4f] = 0x01
[plustek] usb_SetScanParameters() done.
[plustek] Warmup: Waiting 15 seconds
[plustek] usb_ScanBegin()
[plustek] usb_IsDataAvailableInDRAM()
[plustek] NO Data available
[plustek] Nothing to read...
[plustek] usb_AdjustGain() failed
[plustek] Coarse Calibration failed!!!
[plustek] calibration failed!!!
[plustek] read failed, status = -9007, errno 2
[plustek] reader process done, status = 9
[plustek] Child is down (signal=17)
[plustek] drvclose()
[plustek] TIME END 1: 46s
[plustek] usbDev_stopScan(mode=0)
[plustek] usbDev_ScanEnd(), start=1, park=1
[plustek] Lamp-Timer started
[plustek] usbDev_close()
[plustek] res=5304, status=2304
[plustek] Child WEXITSTATUS = 9
[plustek] close_pipe
scanimage: sane_read: Error during device I/O
[dll] sane_close(handle=0x8087ad0)
[plustek] sane_close


Looks like the lamp comes on,  then goes off.  No motor. 

Also - there are four buttons on the scanner... SCAN COPY CUSTOM POWER.

Help if you can.  E-mail me. Thanks. 


-- 
==============================
Brian K. Gaiser
Systems Architect & Integrator
Altus Technologies Corporation
bgaiser@altustech.com
==============================