plustek@linuxhacker.org

Hi Ian,

On Sonntag, 4. Januar 2004 16:22, Taylors wrote:
[SNIPSNAP]
> As usual I did several things so which one actually worked is another
> issue.
>
> I have two linux m/c (one RH9, one RH7.3)
> The sane version on RH7.3 was an oler version (1.0.7 I think)
>
> I downloaded sane 1.0.13 and
>       plustek-module-0_41_5.tar.gz
>      plustek-module-0_42_9.tar.gz
>
> to the RH7.3 one
> un-installed the old sane version and installed sane 1.0.13
> I then compiled plustek-module-0_41_5 (I had trouble with 0_42_9) driver.

These modules are not needed for the lide 30 or any USB scanner - these
are for the old parallelport devices and even those have now a new backend
called plustek_pp...

> Now for my "gray" area.
> The 7.3 didn't use libusb so I need the scanner module
>
> I managed to make this work with
>    modprobe scanner vendor=0x04a9 product=0x220e
>
> originally I hadn't included the vendor/product details.
>
> Thanks very much for your help.
>
> I will move the scanner over to RH9 and try that in time.
>
> Ian Taylor
>
> On Wednesday 31 Dec 2003 6:14 pm, Andreas Balser wrote:
> > >        - RedHat9
> > >        - sane backend 1.0.9
> >
> > Download sane-backends 1.0.13, and it will work w/o problems.
> >
> > (however, see my thread about low scanning quality...)
> >
> > Cheers,
> > Andreas