plustek@linuxhacker.org

This is the new output...
I put mov 2 because the scanner is a primax 4800
direct. But when I put mov 7 the errors were the same.

[sanei_debug] Setting debug level of plustek_pp to 20.
[sanei_debug] Setting debug level of sanei_pp to 4.
[plustek_pp] PlustekPP backend V0.01-5, part of
sane-backends 1.0.13
[plustek_pp] >[direct]<
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] >option mov 2<
[plustek_pp] Decoding option >mov<
[plustek_pp] attach (parport0, 0xbfffcb20, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name   : >parport0<
[plustek_pp] direct I/O    : yes
[plustek_pp] warmup        : -1s
[plustek_pp] lampOff       : -1
[plustek_pp] lampOffOnEnd  : yes
[plustek_pp] model override: 2
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[sanei_pp] sanei_pp_open: called for device `parport0`
[sanei_pp] sanei_pp_open: support not compiled
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] sane_get_devices (0xbfffebc4, 0)
[plustek_pp] sane_exit

No scanners were identified. If you were expecting
something different,
check that the scanner is plugged in, turned on and
detected by the
sane-find-scanner tool (if appropriate). Please read
the documentation
which came with this software (README, FAQ, manpages).


It seems like I havent compiled something. What is
it??


--- Gerhard Jaeger <gerhard@gjaeger.de> wrote:
> Hmm,
> 
> it seems, that you have not loaded the parport
> modules.
> try as root user:
> modprobe parport parport_pc
> 
> Then check the access rights of 
> /dev/parport0
> 
> Should be something like:
> crw-rw-rw-    1 root     root      99,   0
> 2003-03-14 14:08 /dev/parport0
> 
> If not, change 'em:
> chmod 666 /dev/parport*
> 
> 
> The options, that I have are (kernel 2.4.23):
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_PC_CML1=m
> CONFIG_PARPORT_SERIAL=m
> CONFIG_PARPORT_PC_FIFO=y
> CONFIG_PARPORT_PC_SUPERIO=y
> CONFIG_PARPORT_PC_PCMCIA=m
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_SUNBPP is not set
> CONFIG_PARPORT_OTHER=y
> CONFIG_PARPORT_1284=y
> 
> Then try and use the following plustek_pp.conf:
> 
> [direct]
> decvice parport0
> option mov 7
> 
> disable or remove all other entries...
> 
> In the end this is all! 
> 
> Please do one tests again:
> export SANE_DEBUG_SANEI_PP=4 ; export
> SANE_DEBUG_PLUSTEK_PP=20 ; scanimage -L
> 
> and please send me the logs...
> 
> Ciao,
>   Gerhard
> 
> 
> 
> On Thursday 15 January 2004 05:37, Denesh wrote:
> > > can you send me the output?
> > > i.e.: export SANE_DEBUG_PLUSTEK_PP=20 ;
> scanimage -L
> >
> > I compiled sane in my LFS system. And here is the
> > output, when I tried 'scanimage -l'. The scanner
> wasnt
> > detected
> >
> > for sane-backends-1.0.13 the output was
> >
> > [sanei_debug] Setting debug level of plustek_pp to
> 20.
> > [plustek_pp] PlustekPP backend V0.01-5, part of
> > sane-backends 1.0.13
> > [plustek_pp] ># Plustek-PP SANE Backend
> configuration
> > file<
> > [plustek_pp] ># For use with Plustek parallel-port
> > scanners<
> > [plustek_pp] >#<
> > [plustek_pp] ><
> > [plustek_pp] >#<
> > [plustek_pp] ># user either [direct] or [kernel]
> to
> > access the scanner<
> > [plustek_pp] ># when using [kernel], device
> specifies
> > the device-node, which is created<
> > [plustek_pp] ># by the kernel-module loader
> (applies
> > only to Linux)<
> > [plustek_pp] ># when using [direct], device is
> used to
> > set the parallel-port base address<
> > [plustek_pp] ># or a device-name suitable for
> > libieee1284, i.e. parport0<
> > [plustek_pp] >#<
> > [plustek_pp] >[direct]<
> > [plustek_pp] >device 0x378<
> > [plustek_pp] Decoding device name >0x378<
> > [plustek_pp] ><
> > [plustek_pp] >#<
> > [plustek_pp] ># leave the default values as
> specified
> > in /etc/modules.conf<
> > [plustek_pp] >#<
> > [plustek_pp] >option warmup    15<
> > [plustek_pp] Decoding option >warmup<
> > [plustek_pp] >option lOffOnEnd 1<
> > [plustek_pp] Decoding option >lOffOnEnd<
> > [plustek_pp] >option lampOff   180<
> > [plustek_pp] Decoding option >lampOff<
> > [plustek_pp] ><
> > [plustek_pp] ># model override switch, mostly for
> > cosmetic changes, if the autodetection<
> > [plustek_pp] ># does not work or could not work
> > correctly<
> > [plustek_pp] >option mov 2<
> > [plustek_pp] Decoding option >mov<
> > [plustek_pp] ><
> > [plustek_pp] >#<
> > [plustek_pp] ># example for accessing the scanner
> via
> > libieee1284<
> > [plustek_pp] >#<
> > [plustek_pp] >[direct]<
> > [plustek_pp] attach (0x378, 0xbfffcbd0, (nil))
> > [plustek_pp] Device configuration:
> > [plustek_pp] device name   : >0x378<
> > [plustek_pp] direct I/O    : yes
> > [plustek_pp] warmup        : 15s
> > [plustek_pp] lampOff       : 180
> > [plustek_pp] lampOffOnEnd  : yes
> > [plustek_pp] model override: 2
> > [plustek_pp] ---------------------
> > [plustek_pp] drvopen()
> > [plustek_pp] open: PtDrvInit failed: 4
> > [plustek_pp] open failed: -1
> > [plustek_pp] >device parport0<
> > [plustek_pp] Decoding device name >parport0<
> > [plustek_pp] ><
> > [plustek_pp] >option warmup    15<
> > [plustek_pp] Decoding option >warmup<
> > [plustek_pp] >option lOffOnEnd 1<
> > [plustek_pp] Decoding option >lOffOnEnd<
> > [plustek_pp] >option lampOff   180<
> > [plustek_pp] Decoding option >lampOff<
> > [plustek_pp] ><
> > [plustek_pp] >option mov 2<
> > [plustek_pp] Decoding option >mov<
> > [plustek_pp] >#<
> > [plustek_pp] ># example for accessing the scanner
> via
> > the ker
> 
>
---------------------------------------------------------------------
> To unsubscribe, e-mail:
> plustek-unsubscribe@linuxhacker.org
> For additional commands, e-mail:
> plustek-help@linuxhacker.org
> 


=====
R.Denesh

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus