plustek@linuxhacker.org

Hi List,

I just upgraded my debian to sane 1.0.13 and discovered that my scanner did 
not work any more. I was happily surprised when I discovered that the 
plustek driver went into sane - no more caring about a kernel module which 
is not delivered by the package system.
Unfortunaly the new driver won't work for me. plustek_pp is commented out 
in /etc/sane.d/dll.conf, plustek_pp.conf is edited correctly.

This is the debug output of sane (cutoff some irrelevant stuff), maybe 
somebody can give me a hint?

turm:~# SANE_DEBUG_PLUSTEK_PP=255 scanimage -L
[sanei_debug] Setting debug level of plustek_pp to 255.
[plustek_pp] PlustekPP backend V0.01-5, part of sane-backends 1.0.13
[plustek_pp] ># Plustek-PP SANE Backend configuration file<
[plustek_pp] ># For use with Plustek parallel-port scanners<
[..]
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[...]
[plustek_pp] >option warmup    30<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd 0<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff   0<
[plustek_pp] Decoding option >lampOff<
[...]
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via libieee1284<
[plustek_pp] >#<
[plustek_pp] >#[direct]<
[plustek_pp] >#device parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] >#<
[plustek_pp] >#option warmup    -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff   -1<
[plustek_pp] attach (0x378, 0xbfffc7b0, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name   : >0x378<
[plustek_pp] direct I/O    : yes
[plustek_pp] warmup        : 30s
[plustek_pp] lampOff       : 0
[plustek_pp] lampOffOnEnd  : no
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] sane_get_devices (0xbfffe878, 0)
device `v4l:/dev/video0' is a Noname BT848A(Hauppauge (bt848)) virtual 
device
[plustek_pp] sane_exit

Thanks in advance,
Michael