Msg by: [<- thread ->] [<- time ->] [<- author ->] | [Threads] [Home]

plustek@linuxhacker.org

plustek@linuxhacker.org

Subject: Plustek OpticPro 9636T
From: Ronald Hitz
Date: Mon, 6 Nov 2000 15:03:23 +0100 
Hallo,

Bios meldet : parallel port 378/irq7
                  mode ecp/epp

Flatbed Scanner Programm unter win98 meldet :
lpt1 378h 
mode ecp

Der Scanner läuft unter win98.

Bei mir ist SuSE 7.0 eval. installiert;
habe sane-1.0.3
und plustek-module-0-36-35.tar.gz
entpackt und installiert.


nach dem Befehl "make load" beginnen die Schwierigkeiten :

Output an der konsole:
/sbin/modprobe pt_drv || exit 1
/lib/modules/2.2.16/misc/pt_drv.o : init_module: Das Gerät oder die Ressource
ist belegt
Hint : this error can be caused by invorrect module parameters, including
invalid IO oder IRQ parameters.

Ich habe dann mit der debug-Option neu kompiliert und hänge den Output als Datei
"plustek-msg" an.

Hoffentlich könnt Ihr damit etwas anfangen.

Es wäre wirklich ganz, ganz nett von Euch, wenn Ihr mir einen Tip geben könnt.

Vielen herzlichen Dank





-- 
Ronald Hitz
email : derdoode@ivx.de




Nov  6 14:06:05 linux kernel: parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
Nov  6 14:06:06 linux kernel: *********************************************
Nov  6 14:06:06 linux kernel: pt_drv: init_module()
Nov  6 14:06:06 linux kernel: pt_drv : driver version = 0.36-36
Nov  6 14:06:06 linux kernel: ptdrvInit(0)
Nov  6 14:06:06 linux kernel: Init settings done
Nov  6 14:06:06 linux kernel: ScanData = 0xc3344000
Nov  6 14:06:06 linux kernel: Requested port at 0x378
Nov  6 14:06:06 linux kernel: Requested port (0x378) found
Nov  6 14:06:06 linux kernel: Port mode reported: (0x0079)
Nov  6 14:06:06 linux kernel: Port for device 0 registered
Nov  6 14:06:06 linux kernel: ptdrvOpen(port=0x378)
Nov  6 14:06:06 linux kernel: Try to claim the parport
Nov  6 14:06:06 linux kernel: Using SPP-mode
Nov  6 14:06:06 linux kernel: Attempting to set EPP from ECP mode.
Nov  6 14:06:06 linux kernel: Port is set to (ECP) EPP mode.
Nov  6 14:06:06 linux kernel: Starting Scanner-Autodetection
Nov  6 14:06:06 linux kernel: ************ DETECTP48xx ************
Nov  6 14:06:06 linux kernel: ModelSet4800()
Nov  6 14:06:06 linux kernel: modelInitPageSettings()
Nov  6 14:06:06 linux kernel: A4 set
Nov  6 14:06:06 linux kernel: ModelSet4800() done.
Nov  6 14:06:06 linux kernel: P48xxInitAsic()
Nov  6 14:06:06 linux kernel: DacInitialize()
Nov  6 14:06:06 linux kernel: ImageInitialize()
Nov  6 14:06:06 linux kernel: IOInitialize()
Nov  6 14:06:06 linux kernel: MotorInitialize()
Nov  6 14:06:06 linux kernel: Dataport = 0x0378
Nov  6 14:06:06 linux kernel: Ctrlport = 0x037a
Nov  6 14:06:06 linux kernel: Test 0x55
Nov  6 14:06:06 linux kernel: Test 0xAA
Nov  6 14:06:07 linux kernel: Compare data=0xde and status=0x5e, port=0x378
Nov  6 14:06:07 linux kernel: p48xxReadWriteTest()
Nov  6 14:06:07 linux kernel: Can't find your model, asic = 0x5a
Nov  6 14:06:07 linux kernel: detectScannerConnection() returns -9020.
Nov  6 14:06:07 linux kernel: ************ DETECTP9636 ************
Nov  6 14:06:07 linux kernel: ModelSet9636()
Nov  6 14:06:07 linux kernel: ModelSet9360()
Nov  6 14:06:07 linux kernel: modelInitPageSettings()
Nov  6 14:06:07 linux kernel: A4 set
Nov  6 14:06:07 linux kernel: ModelSet9630() done.
Nov  6 14:06:07 linux kernel: modelInitPageSettings()
Nov  6 14:06:07 linux kernel: A4 set
Nov  6 14:06:07 linux kernel: ModelSet9636() done.
Nov  6 14:06:07 linux kernel: P9636InitAsic()
Nov  6 14:06:07 linux kernel: DacInitialize()
Nov  6 14:06:07 linux kernel: ImageInitialize()
Nov  6 14:06:07 linux kernel: IOInitialize()
Nov  6 14:06:07 linux kernel: MotorInitialize()
Nov  6 14:06:07 linux kernel: AsicID = 0x81
Nov  6 14:06:07 linux kernel: Dataport = 0x0378
Nov  6 14:06:07 linux kernel: Ctrlport = 0x037a
Nov  6 14:06:07 linux kernel: Test 0x55
Nov  6 14:06:07 linux kernel: Test 0xAA
Nov  6 14:06:07 linux kernel: Compare data=0xde and status=0x1e, port=0x378
Nov  6 14:06:07 linux kernel: p9636ReadWriteTest()
Nov  6 14:06:07 linux kernel: Error in memory test at pos 4 (4 != 6)
Nov  6 14:06:07 linux kernel: detectScannerConnection() returns -9020.
Nov  6 14:06:07 linux kernel: ptdrvClose()
Nov  6 14:06:07 linux kernel: MiscRestorePort()
Nov  6 14:06:07 linux kernel: Releasing parport
Nov  6 14:06:07 linux kernel: ptdrvShutdown()
Nov  6 14:06:07 linux kernel: cleanup device 0
Nov  6 14:06:07 linux kernel: Lamp-Timer stopped !
Nov  6 14:06:07 linux kernel: Try to claim the parport
Nov  6 14:06:07 linux kernel: Releasing parport
Nov  6 14:06:07 linux kernel: Port unregistered
Nov  6 14:06:07 linux kernel: pt_drv: init failed - ret = -9020
Nov  6 14:06:07 linux kernel: ---------------------------------------------
Nov  6 14:06:07 linux kernel: parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
Nov  6 14:06:07 linux kernel: *********************************************
Nov  6 14:06:07 linux kernel: pt_drv: init_module()
Nov  6 14:06:07 linux kernel: pt_drv : driver version = 0.36-36
Nov  6 14:06:07 linux kernel: ptdrvInit(0)
Nov  6 14:06:07 linux kernel: Init settings done
Nov  6 14:06:07 linux kernel: ScanData = 0xc35cc000
Nov  6 14:06:07 linux kernel: Requested port at 0x378
Nov  6 14:06:07 linux kernel: Requested port (0x378) found
Nov  6 14:06:07 linux kernel: Port mode reported: (0x0079)
Nov  6 14:06:07 linux kernel: Port for device 0 registered
Nov  6 14:06:07 linux kernel: ptdrvOpen(port=0x378)
Nov  6 14:06:07 linux kernel: Try to claim the parport
Nov  6 14:06:07 linux kernel: Using SPP-mode
Nov  6 14:06:07 linux kernel: Attempting to set EPP from ECP mode.
Nov  6 14:06:07 linux kernel: Port is set to (ECP) EPP mode.
Nov  6 14:06:07 linux kernel: Starting Scanner-Autodetection
Nov  6 14:06:07 linux kernel: ************ DETECTP48xx ************
Nov  6 14:06:07 linux kernel: ModelSet4800()
Nov  6 14:06:07 linux kernel: modelInitPageSettings()
Nov  6 14:06:07 linux kernel: A4 set
Nov  6 14:06:07 linux kernel: ModelSet4800() done.
Nov  6 14:06:07 linux kernel: P48xxInitAsic()
Nov  6 14:06:07 linux kernel: DacInitialize()
Nov  6 14:06:07 linux kernel: ImageInitialize()
Nov  6 14:06:07 linux kernel: IOInitialize()
Nov  6 14:06:07 linux kernel: MotorInitialize()
Nov  6 14:06:07 linux kernel: Dataport = 0x0378
Nov  6 14:06:07 linux kernel: Ctrlport = 0x037a
Nov  6 14:06:07 linux kernel: Test 0x55
Nov  6 14:06:07 linux kernel: Test 0xAA
Nov  6 14:06:07 linux kernel: Compare data=0xde and status=0x5e, port=0x378
Nov  6 14:06:07 linux kernel: p48xxReadWriteTest()
Nov  6 14:06:07 linux kernel: Can't find your model, asic = 0x5a
Nov  6 14:06:07 linux kernel: detectScannerConnection() returns -9020.
Nov  6 14:06:07 linux kernel: ************ DETECTP9636 ************
Nov  6 14:06:07 linux kernel: ModelSet9636()
Nov  6 14:06:07 linux kernel: ModelSet9360()
Nov  6 14:06:07 linux kernel: modelInitPageSettings()
Nov  6 14:06:07 linux kernel: A4 set
Nov  6 14:06:07 linux kernel: ModelSet9630() done.
Nov  6 14:06:07 linux kernel: modelInitPageSettings()
Nov  6 14:06:07 linux kernel: A4 set
Nov  6 14:06:07 linux kernel: ModelSet9636() done.
Nov  6 14:06:07 linux kernel: P9636InitAsic()
Nov  6 14:06:07 linux kernel: DacInitialize()
Nov  6 14:06:07 linux kernel: ImageInitialize()
Nov  6 14:06:07 linux kernel: IOInitialize()
Nov  6 14:06:07 linux kernel: MotorInitialize()
Nov  6 14:06:07 linux kernel: AsicID = 0x81
Nov  6 14:06:07 linux kernel: Dataport = 0x0378
Nov  6 14:06:07 linux kernel: Ctrlport = 0x037a
Nov  6 14:06:07 linux kernel: Test 0x55
Nov  6 14:06:07 linux kernel: Test 0xAA
Nov  6 14:06:07 linux kernel: Compare data=0xde and status=0x1e, port=0x378
Nov  6 14:06:07 linux kernel: p9636ReadWriteTest()
Nov  6 14:06:07 linux kernel: Error in memory test at pos 4 (4 != 7)
Nov  6 14:06:07 linux kernel: detectScannerConnection() returns -9020.
Nov  6 14:06:07 linux kernel: ptdrvClose()
Nov  6 14:06:07 linux kernel: MiscRestorePort()
Nov  6 14:06:07 linux kernel: Releasing parport
Nov  6 14:06:07 linux kernel: ptdrvShutdown()
Nov  6 14:06:07 linux kernel: cleanup device 0
Nov  6 14:06:07 linux kernel: Lamp-Timer stopped !
Nov  6 14:06:07 linux kernel: Try to claim the parport
Nov  6 14:06:07 linux kernel: Releasing parport
Nov  6 14:06:07 linux kernel: Port unregistered
Nov  6 14:06:07 linux kernel: pt_drv: init failed - ret = -9020
Nov  6 14:06:07 linux kernel: ---------------------------------------------
Msg by: [<- thread ->] [<- time ->] [<- author ->] | [Threads] [Home]

plustek@linuxhacker.org

(c) 1999 Lin-De, Inc