plustek@linuxhacker.org

Hi list,

I went back to the plustek-sane-0_36_34.tar.gz file. With the "#if
1" setting, the driver loads and I could do scans and prescans
with no problems. Did several prescans in a row, then a scan (both
color and B/W, one at 300 and one at 400 dpi), then another
prescan. Quit xscanimage, restarted it, did several more prescans.
I did this with Redhat 6.1 (kernel 2.2.12) on Cricket and Mandrake
7.2 (kernel 2.2.17) on Paws, using the tarball version of
sane-1.0.3. When I tried the "#if 0" setting, I could not get the
driver to load (Gerhard, I got AsicID=88 and device or resource
busy). When I reset to "#if 1", everything worked as before. I
also tried using this driver on Mandrake 7.2 with the rpms for
sane-1.0.4. The driver loads, but unfortunately I get a version
mismatch when I do "scanimage -L", so I am not able to do a scan.
Gerhard, is there a way of fixing this, or do I have to use the
tarball version of 1.0.4 and compile it myself?

For the moment, if you are having problems scanning, try the
0_36_34 driver version (#if 1 is the default, so you shouldn't
have to change that).

	Kevin