plustek@linuxhacker.org

Thank you for the short info.

Now I can focus my efforts again on the "heavy system load"
topic...

Gerhard

On Son, 11 Feb 2001, Lauri J T Liuhto wrote:
> On Sun, 11 Feb 2001, G. Jaeger wrote:
> > Hi list,
> 
> Greetings
> 
> > is there anybody outside, that has tested the 0.38 driver?
> > Especially somebody with an OP P12/PT12.
> > I'd like to get some feedback on theese devices.
> 
>  I've got P12, and 0.38 driver, up'n runnin'.
> 
>  Scanning is possible, but it is very common, that I get "Error during
> read: Error during device I/O". It seems that results are better when I
> lower resolution or scan smaller area. For example if I set scanning
> area (in xscanimage) to 215mm x 124mm and 50dpi resolution I get good
> result allmost every time. Heavy system load seems to affect too, so I
> usually 'killall mpg123' and 'killall setiathome' before scanning.
> 
>  I'm not expert in tuning Linux-box and my time is limited (but who has
> too much time...) so I haven't tested it much. I think that my parport
> settings are okay, but before I say I'm sure, I've got to RTFM ;)
> 
> And before I can give you more specific problem reports I have to compile
> debug messages into the driver. I think that now it is pretty hard to say
> what is wrong.
> 
> My parport-driver is compiled directly to kernel, and I use
> sane 1.0.4. Kernel is 2.2.16.
> 
> Lauri
> 
> -- 
> lliuhto@cs.helsinki.fi -- 040-7009603
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: plustek-unsubscribe@linuxhacker.org
> For additional commands, e-mail: plustek-help@linuxhacker.org
-- 
+---------------------------------
| Sysgo Real-Time Solutions GmbH
| Gerhard Jaeger
| Schulze-Delitzsch-Weg 28
| D-89079 Ulm
| mail: gjaeger@sysgo.de
| fon:  +49 731 94683-0
| fax:  +49 731 94683-10
+---------------------------------