plustek@linuxhacker.org

Subject: Can't get my 9636P to run
From: dannys9.gmx.de
Date: Sun, 8 Jul 2001 00:04:04 +0200 (MEST)

Hello!

I've tried my best to get my 9636P working, but it won't.

I've installed Sane 1.0.5 and downloaded the Plustek 0.39 drivers. 
Installation worked so far but when I type "make load" I get a "Device or 
ressource busy". I've set up everything as I found in TEXT.txt. The scanner 
seems to be properly connected as the lamp is on. I've also used it under 
Windows with no problems. In debugging mode the installation process ends 
with error -9020. See attached dmesg output.
Any solutions please?

Danny

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net

GMX Tipp:

Machen Sie Ihr Hobby zu Geld bei unserem Partner 1&1!
http://profiseller.de/info/index.php3?ac=OM.PS.PS003K00596T0409a

freed
Adding Swap: 133016k swap-space (priority -1)
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pt_drv : driver version 0.39-4
parport0: PC-style at 0x378 [SPP,PS2,EPP]
parport0: no IEEE-1284 device present.
pt_drv : no device(s) detected, (-9020)
pt_drv : driver version 0.39-4
pt_drv : no device(s) detected, (-9020)
pt_drv : driver version 0.39-4
pt_drv : no device(s) detected, (-9020)
pt_drv : driver version 0.39-4
pt_drv : no device(s) detected, (-9020)
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.39-4
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xcadb4000
Using slow I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0007)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP PS/2 EPP
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
detectScannerConnection() returns -9020.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x20
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
Linux video capture interface: v1.00
i2c: initialized
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.39-4
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xcadb4000
Using slow I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0007)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP PS/2 EPP
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
detectScannerConnection() returns -9020.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x20
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.39-4
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xc3624000
Using slow I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0007)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP PS/2 EPP
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x7e and status=0xe, port=0x378
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
detectScannerConnection() returns -9020.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x20
Unknown ASIC-ID
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv : no device(s) detected, (-9020)
---------------------------------------------