nanogui: Re: compile error when enabling freetype on arm processor, problem solved
Subject:
Re: [nanogui] compile error when enabling freetype on arm processor,
problem solved
From:
tj ####@####.####
Date:
10 Mar 2006 21:47:11 +0000
Message-Id: <4411F411.3020007@comcast.net>
Problem solved, was a typo syntax error in config file about font
location directory.
Thanks for your time...
tj
tj wrote:
> Greg Haerr wrote:
>
>> : Howver, set it to 'Y', do "make clean" then "make" and I
>> immeadiatly get:
>> : : Compiling drivers/obsolete.c
>> : arm-linux-gcc: ": No such file or directory
>> : : Now, if I build it for X86, freetyep = Y, it builds ok....
>>
>> Strange. Set VERBOSE=Y and check out the compiler
>> command lines for more detail on your problem
>>
>> Regards,
>>
>> Greg
>>
>>
>>
>>
> Here's the output:
>
> tj@system:nano-X$ make
> make -C /home/tj/nano-X/drivers
> make[1]: Entering directory `/home/tj/nano-X/drivers'
> Compiling drivers/obsolete.c ...
> arm-linux-gcc -c -DMWPIXEL_FORMAT=MWPF_TRUECOLOR565 -DVTSWITCH=1
> -DHAVE_FILEIO -
> DHAVE_JPEG_SUPPORT=1 -DHAVE_FREETYPE_SUPPORT=1
> -DFREETYPE_FONT_DIR=\""/usr/local
> /microwin/fonts" \" -DHAVE_PCF_SUPPORT=1 -DPCF_FONT_DIR="\""\"
> -DHAVE_PCFGZ_SUPP
> ORT=1 -DHAVE_BMP_SUPPORT=1 -DHAVE_GIF_SUPPORT=1 -DHAVE_PNM_SUPPORT=1
> -DHAVE_XPM_
> SUPPORT=1 -DHAVETEXTMODE=0 -DFBVGA=1 -DERASEMOVE=1 -DUPDATEREGIONS=1
> -DLINUX=1 -
> DUNIX=1 -O -Wall -Wpointer-arith -O3 -mstructure-size-boundary=8 -I.
> -I/home/tj
> /nano-X/include -I/home/tj/nano-X/../jpeg-6b -I/usr/include/freetype1
> -O -Wall -
> Wpointer-arith -O3 -mstructure-size-boundary=8 -I.
> -I/home/tj/nano-X/include -I/
> home/tj/nano-X/../jpeg-6b -I/usr/include/freetype1 -o
> /home/tj/nano-X/obj/driver
> s/obsolete.o /home/tj/nano-X/drivers/obsolete.c
> arm-linux-gcc: ": No such file or directory
> make[1]: *** [/home/tj/nano-X/obj/drivers/obsolete.o] Error 1
> make[1]: Leaving directory `/home/tj/nano-X/drivers'
> make: *** [subdir-/home/tj/nano-X/drivers] Error 2
>
> As I said, only happens with HAVE_FREETYPE_SUPPORT = Y.
>
>
> tj
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
