nanogui: NXlib Installation
Subject:
RE: [nanogui] NXlib Installation
From:
"Demetris Zavorotnichenko" ####@####.####
Date:
25 Jan 2008 09:09:21 -0000
Message-Id: <20080125090807.F13B9187E43@demokritos4.cytanet.com.cy>
I've tried to crosscompile the Nxlib but I have an error at the end saying
"skipping incompatible -libnano-X.so"
And all I have is a libnx11.a file.
Below is my Makefile:
#
# Nano-X11 library makefile - Greg Haerr ####@####.####
#
# note: if build fails, rebuild keysymstr.h by "make distclean",
# then "make"
#
# 11 Aug 2003
#
# set to Microwindows and X11 include and lib directories
MWIN=/gumstix/gumstix-buildroot-gps/build_arm_nofpu/microwindows-0.91/src
X11=/gumstix/gumstix-buildroot-gps/build_arm_nofpu/microwindows-0.91/X11
MWIN_INCLUDE=$(MWIN)/include
MWIN_LIB=$(MWIN)/lib
X11_LIB=$(X11)/lib
# set to font PCF file search directories, rgb.txt file location
X11_FONT_DIR1=/gumstix/gumstix-buildroot-gps/build_arm_nofpu/microwindows-0.
91/fonts/pcf
X11_FONT_DIR2=/gumstix/gumstix-buildroot-gps/build_arm_nofpu/microwindows-0.
91/fonts/pcf
X11_RGBTXT=/gumstix/gumstix-buildroot-gps/build_arm_nofpu/nxlib/rgb.txt
# set to Y to make shared X11 libs
SHAREDLIB=Y
LIBNAME = X11
SOLIBREV = 6.2
# set to Y to include (unmodifed X11) Xrm routines
INCLUDE_XRM=Y
# shared library dependencies and shared library install dir
SOEXTRALIBS = -L$(MWIN_LIB) -lnano-X
INSTALL_DIR = $(X11_LIB)
# compiler flags
##CC = gcc
PWD := $(shell pwd)
GUMSTIX_BUILDROOT = $(PWD)/../gumstix-buildroot-gps
BUILD_ARM = $(wildcard $(GUMSTIX_BUILDROOT)/build_arm*)
KERNELDIR ?= $(wildcard $(BUILD_ARM)/linux-*)
CROSS_COMPILE = $(patsubst %gcc, %, $(wildcard
$(BUILD_ARM)/staging_dir/bin/arm-linux-uclibc*-gcc))
CC = $(CROSS_COMPILE)gcc
##
LN = ln -s
MV = mv
RM = rm -f
DEBUG = -g
CFLAGS += -Wall $(DEBUG) -I$(MWIN_INCLUDE)
CFLAGS += -DX11_FONT_DIR1=\"$(X11_FONT_DIR1)\"
CFLAGS += -DX11_FONT_DIR2=\"$(X11_FONT_DIR2)\"
CFLAGS += -DX11_RGBTXT=\"$(X11_RGBTXT)\"
CFLAGS += -DXCONST=_Xconst
xCFLAGS += -O2 -fno-strength-reduce
##
CPPFLAGS += -I
$(PWD)/../gumstix-buildroot-gps/build_arm_nofpu/microwindows-0.91/src/includ
e
CPPFLAGS += -I $(PWD)/../gumstix-buildroot-gps/build_arm_nofpu/nxlib
OBJS = DestWind.o MapWindow.o NextEvent.o OpenDis.o ClDisplay.o\
Window.o CrGC.o FreeGC.o StName.o Sync.o Flush.o CrWindow.o\
Text.o DrLine.o DrLines.o DrPoint.o DrRect.o DrArc.o\
MapRaised.o RaiseWin.o LowerWin.o FillRct.o CrPixmap.o Clear.o\
MoveWin.o ClearArea.o UnmapWin.o RepWindow.o\
ChWindow.o Backgnd.o BdrWidth.o Border.o PmapBgnd.o LoadFont.o\
UnloadFont.o\
DefCursor.o UndefCurs.o CrCursor.o FontCursor.o\
CrBFData.o CrPFBData.o Region.o SelInput.o Atom.o\
QueryTree.o Image.o WindowProperty.o Misc.o SetWMProps.o Bell.o\
Copy.o SetClip.o Visual.o StrToText.o SetAttributes.o FillPolygon.o\
StrKeysym.o ChProperty.o QueryPointer.o ErrorHandler.o\
ListPix.o GetGeom.o SetIFocus.o Shape.o\
font.o Free.o stub.o\
ClassHint.o Text16.o ListFonts.o QueryFont.o TextExt.o
SetFontPath.o\
AllocColor.o ParseColor.o QueryColor.o Colormap.o Colorname.o
ifeq ($(INCLUDE_XRM), Y)
OBJS += Quarks.o Xrm.o
xOBJS += xrm/Xrm.o xrm/ParseCmd.o xrm/Misc.o xrm/Quarks.o xrm/lcWrap.o \
xrm/lcInit.o xrm/lcGenConv.o xrm/SetLocale.o xrm/lcConv.o xrm/lcUTF8.o \
xrm/lcDefConv.o xrm/lcPubWrap.o xrm/lcDynamic.o xrm/lcCharSet.o \
xrm/lcDB.o xrm/lcGeneric.o xrm/lcUtil.o xrm/lcCT.o xrm/lcFile.o \
xrm/lcPublic.o xrm/lcRM.o xrm/imInt.o
CFLAGS += -I.
endif
LIBS = libnx11.a
ifeq ($(SHAREDLIB), Y)
CFLAGS += -fPIC
LIBS += lib$(LIBNAME).so.$(SOLIBREV)
endif
all: $(LIBS)
# static nx11 library
libnx11.a: keysymstr.h $(OBJS)
ar r libnx11.a $(OBJS)
# shared X11 library
lib$(LIBNAME).so.$(SOLIBREV): $(OBJS)
$(RM) $@~
@SONAME=`echo $@ | sed 's/\.[^\.]*$$//'`; set -x; \
$(CC) -o ./$@~ -shared -Wl,-soname,$$SONAME $(OBJS) $(SOEXTRALIBS)
-lc; \
$(RM) $$SONAME; $(LN) $@ $$SONAME;
$(RM) $@
$(MV) $@~ $@
$(RM) lib$(LIBNAME).so; $(LN) $@ lib$(LIBNAME).so
install: $(LIBS)
$(RM) $(INSTALL_DIR)/lib$(LIBNAME).so; \
$(MV) lib$(LIBNAME).so $(INSTALL_DIR)
@MAJREV=`expr $(SOLIBREV) : '\(.*\)\.'`; set -x; \
$(RM) $(INSTALL_DIR)/lib$(LIBNAME).so.$$MAJREV; \
$(MV) lib$(LIBNAME).so.$$MAJREV $(INSTALL_DIR)
$(RM) $(INSTALL_DIR)/lib$(LIBNAME).so.$(SOLIBREV); \
$(MV) lib$(LIBNAME).so.$(SOLIBREV) $(INSTALL_DIR)
## $(MV) libnx11.a $(INSTALL_DIR)
clean: cleanlibs
$(RM) *.o *~
cleanlibs:
$(RM) libnx11.a
$(RM) lib$(LIBNAME).so
@MAJREV=`expr $(SOLIBREV) : '\(.*\)\.'`; \
set -x; $(RM) lib$(LIBNAME).so.$$MAJREV
$(RM) lib$(LIBNAME).so.$(SOLIBREV)
distclean: clean
rm -f keysymstr.h
keysymstr.h:
perl ./keymap.pl $(X11_INCLUDE)/X11 > ./keysymstr.h
.SUFFIXES:
.SUFFIXES: .c .o
# $(CPPFLAGS)
.c.o:
$(CC) $(CFLAGS) -o $@ -c $<
I know I must have something wrong.
Please help out here.
