nanogui: retry connect attempt
Subject:
Re: [nanogui] retry connect attempt
From:
"Vinod Chaudhary" ####@####.####
Date:
20 Jun 2008 14:15:49 -0000
Message-Id: <03ae01c8d2e0$25f54f40$8c01660a@einpxp131>
If you set 'LINK_APP_INTO_SERVER = Y then your application will include the
server i mean you no need to run ./nano-x server else i suggested in
previous mail.
Thanks,
Vinod
----- Original Message -----
From: "Aveek Adhya" ####@####.####
To: "'Vinod Chaudhary'" ####@####.#### "'Greg Haerr'"
####@####.#### "'nanogui'" ####@####.####
Sent: Friday, June 20, 2008 6:37 PM
Subject: RE: [nanogui] retry connect attempt
> Thanx Vinod.
> What does 'LINK_APP_INTO_SERVER = N' indicate in config file?
> It gave me a wrong impression that probably we don't need to run nano-x if
> the above is set to No.
>
>
> -----Original Message-----
> From: Vinod Chaudhary ####@####.####
> Sent: Friday, June 20, 2008 5:22 PM
> To: Aveek Adhya; 'Greg Haerr'; 'nanogui'
> Subject: Re: [nanogui] retry connect attempt
>
> Hi ,
>
> Please run nano-x server in background and then run the demo application..
>
> # ./nano-x &
> .# /nxclock
>
> Thanks,
> Vinod,
>
>
> ----- Original Message -----
> From: "Aveek Adhya" ####@####.####
> To: "'Greg Haerr'" ####@####.#### "'nanogui'"
> ####@####.####
> Sent: Friday, June 20, 2008 5:17 PM
> Subject: [nanogui] retry connect attempt
>
>
>>
>> Hi,
>>
>> I am trying to port nano-x on ST based platform (LINUX-SH). I have
>> tool-chain working properly for the target platform. After cross
>> compilation
>> and all, when I try to run nano-x sample application on the board I get
>> error message like:
>>
>> nxclient: retry connect attemp 1
>> nxclient: retry connect attemp 2
>> nxclient: retry connect attemp 3
>> .....
>>
>> After googling I can see many people had faced this problem and answer to
>> this problem is to configure mouse/keyboard properly.
>>
>> When I am just going to display something on the screen then what does it
>> matter if mouse/keyboard is not configured properly?
>>
>> Secondly, in my board there is no mouse, and my keyboard driver is not
>> ready
>> yet. I will implement it when keyboard h/w would be ready. But for the
>> time
>> being, I want to see some output on the screen without mouse/keyboard
>> support. But all the sample applications give the same error at runtime.
>>
>> I have compiled nano-x with 'NOMOUSE = Y' and 'NOKBD = Y' option, but I
>> get
>> the same error.
>>
>> Does it mean that I can't run any application on the target board unless
>> keyboard driver is ready/properly configured?
>>
>> Please suggest.
>>
>> Thanks,
>> Aveek
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: ####@####.####
>> For additional commands, e-mail: ####@####.####
>>
>>
>>
>>
>> Email Scanned for Virus & Dengerous Content by : www.CleanMailGateway.com
>>
>
> --
> _____________________________________________________________________
> Disclaimer: This e-mail message and all attachments transmitted with it
> are intended solely for the use of the addressee and may contain legally
> privileged and confidential information. If the reader of this message
> is not the intended recipient, or an employee or agent responsible for
> delivering this message to the intended recipient, you are hereby
> notified that any dissemination, distribution, copying, or other use of
> this message or its attachments is strictly prohibited. If you have
> received this message in error, please notify the sender immediately by
> replying to this message and please delete it from your computer. Any
> views expressed in this message are those of the individual sender
> unless otherwise stated.Company has taken enough precautions to prevent
> the spread of viruses. However the company accepts no liability for any
> damage caused by any virus transmitted by this email.
> _____________________________________________________________________
>
>
>
>
>
> Email Scanned for Virus & Dengerous Content by : www.CleanMailGateway.com
>
--
_____________________________________________________________________
Disclaimer: This e-mail message and all attachments transmitted with it
are intended solely for the use of the addressee and may contain legally
privileged and confidential information. If the reader of this message
is not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, copying, or other use of
this message or its attachments is strictly prohibited. If you have
received this message in error, please notify the sender immediately by
replying to this message and please delete it from your computer. Any
views expressed in this message are those of the individual sender
unless otherwise stated.Company has taken enough precautions to prevent
the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
_____________________________________________________________________
