nanogui: touch screen
Subject:
Re: [nanogui] touch screen
From:
Jordan Crouse ####@####.####
Date:
14 Aug 2001 21:36:17 -0000
Message-Id: <01081415363205.01580@cosmic>
There are generally two types of Strongarm touchscreens. Most strongarm
devices (I would say probably about 80%) use the UCB1x00 (usually the
UCB1200). For these devices, use the ADSMOUSE. I have only seen one
Strongarm device that does not use the UCB1x00, and thats the Ipaq. Alot of
it depends on which touchscreen drivery you use in the kernel. If you use
the h3600_ts driver, then use IPAQMOUSE, otherswise if you use ucb1200_ts,
then use ADSMOUSE.
Jordan
On Tuesday 14 August 2001 15:27, victor mentioned:
> Hi,
> I am using a touch screen(DYNAPRO 95659) connected to my arm board to
> access microwindows. Do you know which driver in microwindows should I
> choose? Or where in the driver files of microwindows should I change?
> I got a mouse error everytime I touch my screen.
> But if I change the ipaq mouse driver a little bit, I can still access
> the window with some kind of "shrinking" mapping so I am sure it should
> be able to work with correct touch screen driver on microwindow.
> Do you have any ideas, thanks??
>
> vic
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####