primax: Thread: Primax 7600


[<<] [<] Page 1 of 1 [>] [>>]
Subject: Primax 7600
From: John P Andrews ####@####.####
Date: 19 Jul 2000 20:25:50 -0000
Message-Id: <Pine.LNX.4.10.10007192123590.369-100000@DadsBox.st-cassians.co.uk>

I am tying this software 0.93 BETA-2

I have tried - but I just get a message "scanner failed to switch into EPP
mode - incompatible? FAQ said to check BIOS settings, and it is on EPP
mode. The scanner motor just hums a bit. The lamp will not tun on or off
(same message).

Is the 7600 actualy incompatible?

-- 
=====================
REGARDS
John P Andrews
=====================

Subject: Re: Primax 7600
From: Christian Ordig ####@####.####
Date: 20 Jul 2000 05:46:42 -0000
Message-Id: <20000720072322.A422@thor.chris.com>

On Wed, Jul 19, 2000 at 09:27:06PM +0100, John P Andrews wrote:
> I am tying this software 0.93 BETA-2
> 
> I have tried - but I just get a message "scanner failed to switch into EPP
> mode - incompatible? FAQ said to check BIOS settings, and it is on EPP
> mode. The scanner motor just hums a bit. The lamp will not tun on or off
> (same message).
Then there actually seems to be a different ASIC in your scanner.
 
> Is the 7600 actualy incompatible?
Seems so...  you may try the pxscan driver for the D9600 written by Gustaf
Kroling.

cu.

-- 
Christian Ordig             | The Primax Scanner Driver Project for Linux/UN*X |
Germany                     |   http://thor.prohosting.com/~chrordig/Primax/   |

[Content type application/pgp-signature not shown. Download]
Subject: Re: Primax 7600
From: John P Andrews ####@####.####
Date: 21 Jul 2000 20:58:51 -0000
Message-Id: <Pine.LNX.4.10.10007210740120.844-100000@DadsBox.st-cassians.co.uk>

On Thu, 20 Jul 2000, Christian Ordig wrote:

> On Wed, Jul 19, 2000 at 09:27:06PM +0100, John P Andrews wrote:
> > I am tying this software 0.93 BETA-2
> > 
> > I have tried - but I just get a message "scanner failed to switch into EPP
> > mode - incompatible? FAQ said to check BIOS settings, and it is on EPP
> > mode. The scanner motor just hums a bit. The lamp will not tun on or off
> > (same message).
> Then there actually seems to be a different ASIC in your scanner.
>  
> > Is the 7600 actualy incompatible?
> Seems so...  you may try the pxscan driver for the D9600 written by Gustaf
> Kroling.
> 
> cu.
> 
> 
Thankyou - I will try (if I can find it).
-- 
=====================
REGARDS
John P Andrews
=====================

[<<] [<] Page 1 of 1 [>] [>>]


Powered by ezmlm-browse 0.20.