nanogui: Error 2 opening pointer calibration file /etc/pointercal.
Subject:
Re: Error 2 opening pointer calibration file /etc/pointercal.
From:
Jordan Crouse ####@####.####
Date:
29 Jan 2001 20:15:29 -0000
Message-Id: <3A75CFF5.C7FF66C@censoft.com>
Compile and run the program in microwin/src/contrib/GPL/tpcal, and pipe
the output to /etc/pointercal.
tpcal draws a pretty UI for calibration, and outputs the numbers to a
file that is then read by the driver. Some find it easier to put
"tpcal > /etc/pointercal" in the same script that you start the Nano-X
server with. That way, the calibration gets handled when the system
starts up.
Jordan
Robert Hartley wrote:
>
> Hi,
>
> (On a NanoX based Helio application)
>
> after I enter GrOpen(), I get the following:
>
> Error 2 opening pointer calibration file /etc/pointercal.
> Cannot initialise mouse
> cannot open graphics
>
> and then the application stops.
>
> Am I missing a config file?
>
> Rob
>
> --
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> = Robert Hartley Mail: 201 Broadway =
> = Central Region Systems Engineer Cambridge, MA 02139 =
> = Integrated Computer Email: ####@####.#### =
> = Solutions, Inc. Web Site: www.ics.com =
> = Tech Support: ####@####.#### Phone: 800-800-4271 =
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> Visit the MotifZone (www.motifzone.org) for info on Motif!
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
