plustek: Installation Frustration


Previous by date: 9 May 2002 02:21:29 -0000 [long] hp scanjet 2100c detected but scanimage not functionning, EricFournié
Next by date: 9 May 2002 02:21:29 -0000 MDK 8.2 and 9636T, mnk
Previous in thread: 9 May 2002 02:21:29 -0000 Re: Installation Frustration, Jaeger, Gerhard
Next in thread:

Subject: Re: Installation Frustration
From: Steven Sforza ####@####.####
Date: 9 May 2002 02:21:29 -0000
Message-Id: <1020910358.7239.37.camel@localhost.localdomain>

Actually it didn't get me completely going, but it got me closer - the
modprobe error came from /sbin not being in my path (apparantly even
though I could run /sbin/modprobe manually, the install script wasn't so
smart) - and then, oddly enough, I had to run "make install" 3 times,
but on the 3rd time it took.
I can do a "scanimage -L" and it detects the scanner (as the wrong
model, it shows it as a 6000 and it's a 4800, but at least it detects
it)
But - as soon as I run scanimage without the -L switch, it complains
that there is no scanner. xscanimage gives the same result. Is there
something else I missed? The install docs that come with the plustek
drivers seem to assume that once you've done a successful "scanimage -L"
than all is clear, but that doesn't appear to be the case on my PC...
Any ideas?



On Tue, 2002-05-07 at 01:39, Jaeger, Gerhard wrote:
> Did you perform the make load step as root user???
> If yes, then have you installed the mod-utils???
> That's normally all! The Makefile could not find the
> modprobe utility...
> 
> Hope this helps
>   Gerhard
> 
> On Friday, 3. May 2002 04:29, Steven Sforza wrote:
> > Sorry if this has already been brought up a thousand times... I didn't
> > see archives anywhere on linuxhacker.org -
> >
> > Anyway, I'm trying to get a Plustek 4800P working through SANE, and I'm
> > pulling my hair out - was hoping somebody could give some advice.
> >
> > I -thought- I followed all the steps correctly, but when I get to the
> > make-load, it gives me this:
> >
> > /sbin/modprobe pt_drv || exit 1
> > sh: modprobe: command not found
> > modprobe: pre-install pt_drv failed
> > modprobe: insmod pt_drv failed
> > make: *** [load] Error 1
> >
> > What am I missing?
> >
> > Thanks!
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
> 
-- 
One day Alice came to a fork in the road and saw a Cheshire cat in a
tree.
"Which road do I take?" she asked. His response was a question: "Where
do you want to go?"
"I don't know," Alice answered. "Then," said the cat, "it doesn't
matter." - Lewis Carroll


Previous by date: 9 May 2002 02:21:29 -0000 [long] hp scanjet 2100c detected but scanimage not functionning, EricFournié
Next by date: 9 May 2002 02:21:29 -0000 MDK 8.2 and 9636T, mnk
Previous in thread: 9 May 2002 02:21:29 -0000 Re: Installation Frustration, Jaeger, Gerhard
Next in thread:


Powered by ezmlm-browse 0.20.