plustek: insmod pt_drv failed
Subject:
Re: insmod pt_drv failed
From:
"Jaeger, Gerhard" ####@####.####
Date:
23 May 2002 18:59:36 -0000
Message-Id: <17AxeK-0R7F1EC@fmrl02.sul.t-online.com>
On Thursday, 23. May 2002 20:40, Heiko Schmidt-Evers wrote:
[SNIP]
> *********************************************
> pt_drv: init_module()
> pt_drv : driver version 0.40-18
> ProcFsInitialize()
> ptdrvInit(0)
> Init settings done
> ScanData = 0xc2ea4000
> Using fast I/O
> Requested port at 0x378
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
> Requested port (0x378) found
> Port mode reported: (0x0047)
> Port for device 0 registered
> ptdrvOpen(port=0x378)
> Try to claim the parport
--> parport-modi: SPP PS/2 EPP EPP(ECP) PS/2(ECP)
> Using EPP-mode
> Starting Scanner-Autodetection
[SNAP]
> p48xxReadWriteTest()
--> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
--> No memory ! No scanner...
[SNAP]
> linux:/home/heiko/scanner/backend/plustek_driver #
>
> What can I do next???
Change the settings of your parport! The ASIC is detected
correctly, but in EPP mode, the driver can't access the memory!
As first test, try and set the parport to SPP (in the BIOS), then
you might try EPP but NOT ECP...
Gerhard
-------------------------
gerhard AT gjaeger DOT de
