Subject:
Re: Problems with plustek-module-0_42_9.tar.gz
From:
Martin Baum ####@####.####
Date:
30 Sep 2002 18:33:17 -0000
Message-Id: <200209302024.51106.martin.baum@berlin.de>
hi.
On Monday 30 September 2002 20:15, Jaeger, Gerhard wrote:
> One thing you can do now is:
> open a shell:
> export SANE_DEBUG_PLUSTEK=12
> xsane
>
> Then you should get some debug output which you
> should send to the list, then we might find the problem...
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.8
[plustek] sane_init, ># Plustek-SANE Backend configuration file<
[plustek] sane_init, ># For use with Plustek parallel-port scanners and<
[plustek] sane_init, ># LM9831/2 based USB scanners<
[plustek] sane_init, >#<
[plustek] sane_init, ># For parport devices use the parport section<
[plustek] sane_init, >#<
[plustek] sane_init, >#[parport]<
[plustek] sane_init, >#device /dev/scanner/pt_drv0<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># leave the default values as specified in
/etc/modules.conf<
[plustek] sane_init, >#<
[plustek] sane_init, >#warmup -1<
[plustek] sane_init, >#lOffOnEnd -1<
[plustek] sane_init, >#lampOff -1<
[plustek] sane_init, ><
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># The USB section<
[plustek] sane_init, ># each device needs at least two lines:<
[plustek] sane_init, ># - [usb] vendor-ID and product-ID<
[plustek] sane_init, ># - device devicename<
[plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] sane_init, ># [usb] 0x07B3 0x0017<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># additionally you can specify some options<
[plustek] sane_init, ># warmup, lOffOnEnd, lampOff<
[plustek] sane_init, >#<
[plustek] sane_init, ># For autodetection<
[plustek] sane_init, ># [usb]<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ><
[plustek] sane_init, >[usb] 0x4b8 0x11d<
[plustek] next device is a USB device (0x04B8-0x011D)
[plustek] next device is an USB device
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># options for the previous USB entry<
[plustek] sane_init, >#<
[plustek] sane_init, ># switch lamp off after xxx secs, 0 disables the
feature<
[plustek] sane_init, >option lampOff 120<
[plustek] Decoding option >lampOff<
[plustek] sane_init, ><
[plustek] sane_init, ># warmup period in seconds, 0 means no warmup<
[plustek] sane_init, >option warmup 180<
[plustek] Decoding option >warmup<
[plustek] sane_init, ><
[plustek] sane_init, ># 0 means leave lamp-status untouched, not 0 means
switch off<
[plustek] sane_init, ># on sane_close<
[plustek] sane_init, >option lOffOnEnd 0<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># and of course the device-name<
[plustek] sane_init, >#<
[plustek] sane_init, >device /dev/usb/scanner0<
[plustek] Decoding device name >/dev/usb/scanner0<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># to define a new device, start with a new
section:<
[plustek] sane_init, ># [usb] or [parport]<
[plustek] sane_init, >#<
[plustek] attach (/dev/usb/scanner0, 0xbfffc340, (nil))
[plustek] Device configuration:
[plustek] device name : >/dev/usb/scanner0<
[plustek] porttype : 1
[plustek] USB-ID : >0x04B8-0x011D<
[plustek] warmup : 180s
[plustek] lampOff : 120
[plustek] lampOffOnEnd : 0
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usb/scanner0,0x04B8-0x011D)
[plustek] Vendor ID=0x04B8, Product ID=0x011D
[plustek] Device >0x04B8-0x011D<, is not supported! // ??? :(
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfffe418, 0)
[plustek] sane_exit
martin@Janny:~ > cat /proc/bus/usb/devices
[...]
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=011d Rev= 1.00
S: Manufacturer=EPSON
S: Product=??????????????????
[...]
martin@Janny:~ > l /dev/usb/scanner0
crw-rw-rw- 1 root root 180, 48 Jan 1 1970
/dev/usb/scanner0
I don't understand ...
martin
--
"Gib jedem Tag die Chance, der schönste deines Lebens zu werden."
(Mark Twain, amerikanischer Schriftsteller, 1835 - 1910)
Desktop ROCK Linux User: #247799 (http://counter.li.org)
http://wildwechsel.de.vu (http://www.tfh-berlin.de/~s713261)
