plustek: CanoScan LiDE 30
Subject:
Re: CanoScan LiDE 30
From:
Jeff Breidenbach ####@####.####
Date:
30 Dec 2002 07:45:48 -0000
Message-Id: <1041233888.23167.8.camel@yodel.jab.org>
Editted plustek.conf as suggested.
# rmmod scanner
# scanimage -L
Same results ("No scanner was identified...")
Is a remote login helpful?
-Jeff
On Sat, 2002-12-28 at 04:54, Jaeger, Gerhard wrote:
> One thing I've forgotten,
> when using 0.45test4 and so on, there's no need to load
> scanner.o, as libusb is supported:
> plustek.conf
> [usb] 0x04a9 0x220e
> device auto
>
> Gerhard
>
> On Saturday, 28. December 2002 06:22, Jeff Breidenbach wrote:
> > I tried out the very newest PlusTek backend, with no luck. Here's my
> > problem report in case it is useful for developers.
> >
> > Jeff
> >
> > ==========
> >
> >
> > $ sane-find-scanner
> > found USB scanner (vendor=0x04a9, product=0x220e) at libusb:001:005
> >
> > The box says CanoScan LiDE 30, but the USB matches CanoScan N1240U
> > which has been working since 0.45-TEST4 of the PlusTek backend
> > according to the website. So I built and installed sane 1.0.9 with the
> > latest Plustek drivers under Debian Linux (unstable branch). No problems
> > during the build.
> >
> > $ apt-get source sane-backends
> > $ cd sane-backends-1.0.9
> > $ tar xvzf ~/plustek-sane-0_44_10.tar.gz
> > $ debuild -us -uc
> > # dpkg --install ../*.deb
> >
> > I made sure there was a device entry and that the usb modules
> > were loaded with correct parameters.
> >
> > # mknod /dev/usbscanner0 c 180 48
> > # rmmod scanner
> > # depmod scanner vendor=0x04a9 product=0x220e
> >
> > I appended to the end of /etc/plustek.conf:
> >
> > [usb] 0x04a9 0x220e
> > device /dev/usbscanner0
> >
> > I tried VueScan (a commercial Linux scanner program) and it works
> > fine; I was able to get successful captures. Unfortunately scanimage
> > -L returns "No scanner was identified..." I am happy to provide more
> > information or a remote login if that is helpful for driver
> > developers.
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: ####@####.####
> > For additional commands, e-mail: ####@####.####
