plustek: Plustek USB UT12
Subject:
Re: Plustek USB UT12
From:
"Peter Johnson" ####@####.####
Date:
9 Dec 2001 17:45:34 -0000
Message-Id: <000701c180d9$2fe3c780$0200a8c0@vulcan>
Oh well, if I do eventually get it to work I'll post it up for everyone.
Peter Johnson,
####@####.####
----- Original Message -----
From: Jaeger, Gerhard ####@####.####
To: Peter Johnson ####@####.####
####@####.####
Sent: Sunday, December 09, 2001 5:28 PM
Subject: Re: Plustek USB UT12
> Hi, the problem is, that Plustek has sold several UT12 types!
> The early ones AFAIK use the parallelport stuff and a parallel to USB
> bridge - they are in fact not supported. The only UT12 models, that
> are supported have the 0x17 as product ID.
>
> And it seems, that you have an older one - sorry
> Gerhard
>
> On Sunday, 9. December 2001 18:14, Peter Johnson wrote:
> > Hi,
> >
> > I've downloaded and installed sane backends 1.0.6 and then the
latest
> > version
> > of your driver (0_40_10) and am having a few difficulties. I know its
> > developers
> > only but what hell I thought I'd give it a go. I've got a Plustek UT12,
> > using your
> > instrustions in the archive I've managed to get my system (Mandrake 8.1)
to
> > recognise my scanner but all my attempts to communicate with it have
> > failed.
> >
> > Sane-Find-Scanner reports that it has found a scanner with the
> > following:
> > Vendor ID: 0x07B3 Product ID: 0x0001
> >
> > The command "Cat /proc/bus/usb/devices" turns up with a version
number
> > of 1.0. The ScanImage cammand can't seem to find the scanner, if I
specify
> > the location (e.g. plustek:/dev/usb/scanner) it returns a segmentation
> > fault error message.
> >
> > I did attempt to edit the plustek-devs.c file and add my scanner in
but
> > this doesn't seem to have had any affect what-so-ever.
> >
> > Any advice would be appreciated,
> >
> > Many Thanks,
> >
> > Peter Johnson,
> > ####@####.####
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
