plustek: Thread: Plustek OpticPro 4800P

Any one on this list ever gotten the driver to work in FreeBSD? I am going to 
start trying as soon as I get time. Any help/pointers in advance would be 
appreciated.

Regards,

Mark.
-- 
Mark Slingo
####@####.####
http://www.slingo.nq.nu

I don't think so!
But feel free to make it work. You may only apply changes to the file pt_drv.c
where the module interface is implemented and not use the procfs stuff...
If you have success, I'd like to add your patches...

Good luck
Gerhard

On Don, 05 Jul 2001, Mark Slingo wrote:
> Any one on this list ever gotten the driver to work in FreeBSD? I am going to 
> start trying as soon as I get time. Any help/pointers in advance would be 
> appreciated.
> 
> Regards,
> 
> Mark.
> -- 
> Mark Slingo
> ####@####.####
> http://www.slingo.nq.nu

Hi,

I have a PlustekOptic Pro 4800P on a parallel-port.
This is what scanimage -L says:

device `plustek:/dev/pt_drv' is a Plustek 600P/6000P flatbed scanner

Well, the grayscan works great but the colorscan is only green and very blurred:
http://forum.winner.de/attachment.php?s=&postid=49188

I sit on Debian Woody, Kernel 2.4.17, however I had the same problem with Mandrake 8.1.

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

Assuming you're using the latest driver (0.41) you can
use the mov=6 switch as option for your kernel module.
This should help...

Gerhard

BTW: Please reply to the list if necessary

On Donnerstag, 28. Februar 2002 14:20, Denis wrote:
> Hi,
>
> I have a PlustekOptic Pro 4800P on a parallel-port.
> This is what scanimage -L says:
>
> device `plustek:/dev/pt_drv' is a Plustek 600P/6000P flatbed scanner
>
> Well, the grayscan works great but the colorscan is only green and very
> blurred: http://forum.winner.de/attachment.php?s=&postid=49188
>
> I sit on Debian Woody, Kernel 2.4.17, however I had the same problem with
> Mandrake 8.1.
>
>

Thx.
However, with mov=6 was no change, mov=2 was the solution :-)


On Thu, 28 Feb 2002 14:57:59 +0100
"Jaeger, Gerhard" ####@####.#### wrote:

> Assuming you're using the latest driver (0.41) you can
> use the mov=6 switch as option for your kernel module.
> This should help...
> 
> Gerhard
> 
> BTW: Please reply to the list if necessary
> 
> On Donnerstag, 28. Februar 2002 14:20, Denis wrote:
> > Hi,
> >
> > I have a PlustekOptic Pro 4800P on a parallel-port.
> > This is what scanimage -L says:
> >
> > device `plustek:/dev/pt_drv' is a Plustek 600P/6000P flatbed scanner
> >
> > Well, the grayscan works great but the colorscan is only green and very
> > blurred: http://forum.winner.de/attachment.php?s=&postid=49188
> >
> > I sit on Debian Woody, Kernel 2.4.17, however I had the same problem with
> > Mandrake 8.1.
> >
> >

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com