plustek: Thread: unresolved symbols

Hi Gerhard,
I'm back again.

I have changed to the new SuSE 8.0 with kernel 2.4.28-4GB. So I must bring in 
my scanner again, but this time it will not go round. I think I made again a 
mistake.
I'm using my old archive of sane-1.0.3 and "plustek-sane-0_36_38.tar.gz
Also my old scanner Plustek Optic Pro 4831

Till to the end everything worked fine but if I made "make load" it's not 
working.
Perhaps I must get new archives, maybe.
Will you please take a look at the message of the console.
--------
nathan:/home/karsten/Scanner/sane-1.0.3/backend/backend/plustek_driver # make 
load
/sbin/modprobe pt_drv || exit 1
/lib/modules/2.4.18-4GB/misc/pt_drv.o: unresolved symbol get_fast_time
/lib/modules/2.4.18-4GB/misc/pt_drv.o:
Hint: You are trying to load a module without a GPL compatible license
      and it has unresolved symbols.  Contact the module supplier for
      assistance, only they can help you.

/lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod 
/lib/modules/2.4.18-4GB/misc/pt_drv.o failed
/lib/modules/misc/pt_drv.o: unresolved symbol get_fast_time
/lib/modules/misc/pt_drv.o:
Hint: You are trying to load a module without a GPL compatible license
      and it has unresolved symbols.  Contact the module supplier for
      assistance, only they can help you.

/lib/modules/misc/pt_drv.o: insmod /lib/modules/misc/pt_drv.o failed
/lib/modules/misc/pt_drv.o: insmod pt_drv failed
make: *** [load] Fehler 1
nathan:/home/karsten/Scanner/sane-1.0.3/backend/backend/plustek_driver #

--------

Perhaps you can tell me what mistake I made and how I can bring in my scanner.

regards

Karsten Giesow

-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680

Hi,

the problem is the old tar-ball, in the versions 0.41 and 0.42
this problem has been already solved!
I'm wondering about the version 2.4.28 ;-)))
I'm not sure which SANE-version they're using, I think 1.0.7,
so simply put this RPM onto you're machine and use plustek-module41
That should do the trick...

--
Gerhard

 -------------------------
|gerhard AT gjaeger DOT de|
 -------------------------

On Sonntag, 16. Juni 2002 17:07, Karsten Giesow wrote:
> Hi Gerhard,
> I'm back again.
>
> I have changed to the new SuSE 8.0 with kernel 2.4.28-4GB. So I must bring
> in my scanner again, but this time it will not go round. I think I made
> again a mistake.
> I'm using my old archive of sane-1.0.3 and "plustek-sane-0_36_38.tar.gz
> Also my old scanner Plustek Optic Pro 4831
>
> Till to the end everything worked fine but if I made "make load" it's not
> working.
> Perhaps I must get new archives, maybe.
> Will you please take a look at the message of the console.
> --------
> nathan:/home/karsten/Scanner/sane-1.0.3/backend/backend/plustek_driver #
> make load
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.4.18-4GB/misc/pt_drv.o: unresolved symbol get_fast_time
> /lib/modules/2.4.18-4GB/misc/pt_drv.o:
> Hint: You are trying to load a module without a GPL compatible license
>       and it has unresolved symbols.  Contact the module supplier for
>       assistance, only they can help you.
>
> /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod
> /lib/modules/2.4.18-4GB/misc/pt_drv.o failed
> /lib/modules/misc/pt_drv.o: unresolved symbol get_fast_time
> /lib/modules/misc/pt_drv.o:
> Hint: You are trying to load a module without a GPL compatible license
>       and it has unresolved symbols.  Contact the module supplier for
>       assistance, only they can help you.
>
> /lib/modules/misc/pt_drv.o: insmod /lib/modules/misc/pt_drv.o failed
> /lib/modules/misc/pt_drv.o: insmod pt_drv failed
> make: *** [load] Fehler 1
> nathan:/home/karsten/Scanner/sane-1.0.3/backend/backend/plustek_driver #
>
> --------
>
> Perhaps you can tell me what mistake I made and how I can bring in my
> scanner.
>
> regards
>
> Karsten Giesow

Hi Gerhard,

your mail-adresse is not working.
If I'm using reply the mail came back.

Am Montag, 17. Juni 2002 08:35 schrieb Jaeger, Gerhard:
> Hi,
>
> the problem is the old tar-ball, in the versions 0.41 and 0.42
> this problem has been already solved!
> I'm wondering about the version 2.4.28 ;-)))
Yes You are right. It must be 2.4.18-4GB
Sorry.
> I'm not sure which SANE-version they're using, I think 1.0.7,
> so simply put this RPM onto you're machine and use plustek-module41
> That should do the trick...
You are right again, it is version 1.0.7-59 .

But I couldn't bring my scanner to work.

During the installation I couldn't see something what is looking wrong.
Please take a look at the messages from ls mod
---------
nathan:/home/karsten # lsmod
Module                  Size  Used by    Tainted: P
pt_drv                111264   0  (unused)
snd-pcm-oss            45152   1  (autoclean)
snd-mixer-oss          11136   1  (autoclean)
NVdriver              946752  10  (autoclean)
parport_pc             25448   2  (autoclean)
lp                      5824   0  (autoclean)
parport                21856   2  (autoclean) [pt_drv parport_pc lp]
snd-ens1371            12036   2
snd-pcm                58528   0  [snd-pcm-oss snd-ens1371]
snd-timer              11456   0  [snd-pcm]
snd-rawmidi            13536   0  [snd-ens1371]
snd-seq-device          4336   0  [snd-rawmidi]
snd-ac97-codec         24196   0  [snd-ens1371]
snd                    31720   0  [snd-pcm-oss snd-mixer-oss snd-ens1371 
snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec]
soundcore               3268   6  [snd]
ipv6                  123424  -1  (autoclean)
joydev                  5728   0  (unused)
evdev                   3904   0  (unused)
input                   3072   0  [joydev evdev]
st                     25844   0  (autoclean) (unused)
sg                     23620   0  (autoclean)
usb-uhci               20996   0  (unused)
usbcore                55136   1  [usb-uhci]
ne2k-pci                4800   1
8390                    5856   0  [ne2k-pci]
hisax                 500452   4
isdn                  119104   6  [hisax]
slhc                    4432   1  [isdn]
isa-pnp                27816   0  [hisax]
ide-scsi                7648   0
reiserfs              158816   1

---------
I have made also the test like in the test-file
---------
nathan:/home/karsten # cat /proc/pt_drv/device0/info
Model       : 600P/6000P
Portaddress : 0x378
Portmode    : BiDi (PS/2) (fast I/O, autodetect)
Buttons     : 0
Warmuptime  : 30s
Lamp timeout: 180s
mov-switch  : 0
I/O-delay   : 0
CCD-Type    : NEC/TOSHIBA Type
TPA         : no
nathan:/home/karsten # cat /proc/parport/0/hardware
cat: /proc/parport/0/hardware: Datei oder Verzeichnis nicht gefunden
nathan:/home/karsten #
---------
When I made "scanimage -L" I got no answer from my system
---------
nathan:/home/karsten # scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten #
---------
This are the lines from /var/log/warn
----------
Jun 18 11:00:46 nathan kernel: pt_drv0: Lamp-Timer set to 180 seconds.
Jun 18 11:00:46 nathan kernel: pt_drv0: WarmUp period set to 30 seconds.
Jun 18 11:00:46 nathan kernel: pt_drv0: Lamp untouched on driver unload
----------
After a reboot, when I made "scanimage -L" as root, The lamp in the scanner 
was on, but now it is not more doing.

Please can you tell me where I must search for and perhaps what's my mistake.

Till next time

Karsten
-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680

Hi Gerhard,

I'm still trying to bring the scanner to work. But it will not do.
I unload and uninstall all from the driver and also sane and made all new.
You told me
---------
so simply put this RPM onto you're machine and use plustek-module41
That should do the trick...
---------
Now I found a warning, what I don't see by the first time. I think it is the 
mistake. Please take a look.
-------------------------
####@####.#### make all DEBUG=y
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-M ./src/*.c > .depend
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/dac.c -o obj/dac.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/detect.c -o obj/detect.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/genericio.c -o obj/genericio.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/image.c -o obj/image.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/map.c -o obj/map.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/misc.c -o obj/misc.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/models.c -o obj/models.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/io.c -o obj/io.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/procfs.c -o obj/procfs.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/motor.c -o obj/motor.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/p9636.c -o obj/p9636.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/ptdrv.c -o obj/ptdrv.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/scale.c -o obj/scale.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/tpa.c -o obj/tpa.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/p48xx.c -o obj/p48xx.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/p12.c -o obj/p12.o
gcc -Wall -Wstrict-prototypes -fomit-frame-pointer -D_PTDRV_V1=0 
-D_PTDRV_V0=41 -D_PTDRV_BUILD=6 -D__KERNEL__ 
-I/lib/modules/2.4.18-4GB/build/include -I./h -I./.. -O -g -DDEBUG  -DMODULE 
-c src/p12ccd.c -o obj/p12ccd.o
ld -r obj/dac.o obj/detect.o obj/genericio.o obj/image.o obj/map.o obj/misc.o 
obj/models.o obj/io.o obj/procfs.o obj/motor.o obj/p9636.o obj/ptdrv.o 
obj/scale.o obj/tpa.o obj/p48xx.o obj/p12.o obj/p12ccd.o -o pt_drv.o
####@####.#### su
Password:
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver # make install
mkdir -p /lib/modules/2.4.18-4GB/misc
install -c -m "644" pt_drv.o /lib/modules/2.4.18-4GB/misc
/sbin/depmod -a
depmod: *** Unresolved symbols in /lib/modules/misc/pt_drv.o
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver #
-------------------------
Can you please tell me what the driver is missing?
The kernel source are there, also alsothe ther stuff, what is standing in the 
"install-file" what you have to install if you have a "SuSE-Linux".
I don't know what I must do.
Please help

regards

Karsten Giesow
-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680

Hi Karsten,

my mail address is still working, see signature. I changed 
the reply address to reduce spam mails....

Well the problem is only, that scanimage doesn't find the scanner
pt_drv is fine, it's loaded (see lsmod) and your scanner is here,
see cat /proc/pt_drv/device0/info...

To see the real problem, I need the debug output of SANE:
open a shell
do a
export SANE_DEBUG_PLUSTEK=12
then call scanimage -L and send me the output (remember not only
reply to this mail ;-)))

Gerhard

P.S.: Sorry for the late reponse...

-------------------------
|gerhard AT gjaeger DOT de|
 -------------------------

On Dienstag, 18. Juni 2002 23:13, Karsten Giesow wrote:
> Hi Gerhard,
>
> your mail-adresse is not working.
> If I'm using reply the mail came back.
[SNIP]
> During the installation I couldn't see something what is looking wrong.
> Please take a look at the messages from ls mod
> ---------
> nathan:/home/karsten # lsmod
> Module                  Size  Used by    Tainted: P
> pt_drv                111264   0  (unused)

[SNAP]
> ---------
> I have made also the test like in the test-file
> ---------
> nathan:/home/karsten # cat /proc/pt_drv/device0/info
> Model       : 600P/6000P
> Portaddress : 0x378
> Portmode    : BiDi (PS/2) (fast I/O, autodetect)
> Buttons     : 0
> Warmuptime  : 30s
> Lamp timeout: 180s
> mov-switch  : 0
> I/O-delay   : 0
> CCD-Type    : NEC/TOSHIBA Type
> TPA         : no

Hi Gerhard,

Am Freitag, 21. Juni 2002 10:56 schrieben Sie:
> Hi Karsten,
>
> my mail address is still working, see signature. I changed
> the reply address to reduce spam mails....

Yes, now I have seen.
>
> Well the problem is only, that scanimage doesn't find the scanner
> pt_drv is fine, it's loaded (see lsmod) and your scanner is here,
> see cat /proc/pt_drv/device0/info...

yes,  my scanner is there, but first I must make an
insmod pt_drv
If I don't do so, the result is following.
>
> To see the real problem, I need the debug output of SANE:
> open a shell
> do a
> export SANE_DEBUG_PLUSTEK=12
-------------------------------
karsten@nathan:~> su
Password:
nathan:/home/karsten #
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12
nathan:/home/karsten # scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12 scanimage -L
bash: export: `-L': not a valid identifier
nathan:/home/karsten # lsmod
Module                  Size  Used by    Tainted: P
snd-pcm-oss            45152   1  (autoclean)
snd-mixer-oss          11136   1  (autoclean)
NVdriver              946752  10  (autoclean)
parport_pc             25448   1  (autoclean)
lp                      5824   0  (autoclean)
parport                21856   1  (autoclean) [parport_pc lp]
snd-ens1371            12036   2
~~~~~~~~~~~~~~~~~~~
-------------------------------
> then call scanimage -L and send me the output (remember not only
> reply to this mail ;-)))

after 
insmod pt_drv
it is just the same
----------------------------------
nathan:/home/karsten # insmod pt_drv
Using /lib/modules/2.4.18-4GB/misc/pt_drv.o
nathan:/home/karsten # export SANE_DEBUG_PLUSTEK=12
nathan:/home/karsten # scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
nathan:/home/karsten #
----------------------------------
>
> P.S.: Sorry for the late reponse...
Is okay. I know that you have a lot of to do, and that you are not only 
working for the mailing list.

Perhaps, in my second mail from wednesday, I tried to uninstalled all and 
unload all after this I made all new and the I found a mistake.
When I made  make install, I got a warning, perhaps there is the mistake.
I will copy the step with the warning.
------------------------------------------------

####@####.#### su
Password:
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver # make install
mkdir -p /lib/modules/2.4.18-4GB/misc
install -c -m "644" pt_drv.o /lib/modules/2.4.18-4GB/misc
/sbin/depmod -a
depmod: *** Unresolved symbols in /lib/modules/misc/pt_drv.o
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver #
------------------------------------------------

I think there it is what the driver is missing, but I don't know what this 
means: Unresolved symbols in /lib/....

Have I made something wrong by the installation?

mfg

Karsten
-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680

Karsten,

insmod is okay a user root, then the pt_drv should be loaded!
But I think it will not work that you run scanimage as root!

try again the following (as user Karsten or so):
export SANE_DEBUG_DLL=255
export SANE_DEBUG_PLUSTEK=12
scanimage -L

I think there's something wrong with your installation!
You might check the dll.conf at /etc/sane.d
it may contain only one simple line named
plustek

Gerhard

Hi Gerhard,

Am Samstag, 22. Juni 2002 18:26 schrieben Sie:
> Karsten,
>
> insmod is okay a user root, then the pt_drv should be loaded!
> But I think it will not work that you run scanimage as root!
>
> try again the following (as user Karsten or so):
> export SANE_DEBUG_DLL=255
> export SANE_DEBUG_PLUSTEK=12
> scanimage -L
I have done and here comes the output
------------------
karsten@nathan:~> export SANE_DEBUG_DLL=255
karsten@nathan:~> export SANE_DEBUG_PLUSTEK=12
karsten@nathan:~> scaniamge -L
bash: scaniamge: command not found
karsten@nathan:~> scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.5 from sane-backends-1.0.7
[dll] sane_exit: exiting
[dll] sane_exit: finished
karsten@nathan:
------------------
>
> I think there's something wrong with your installation!
> You might check the dll.conf at /etc/sane.d
> it may contain only one simple line named
> plustek

Yes there was a mistake, all scannernames are standing in the 
/etc/sane.d/dll.conf all in front with the kommentsign "#"
I removed the "#" in front of plsutek and got now the following output.
------------------------
karsten@nathan:~> scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.5 from sane-backends-1.0.7
[dll] add_backend: adding backend plustek
[dll] load: loading backend plustek
[dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.7
[plustek] sane_init, ># Plustek-SANE Backend configuration file<
[plustek] sane_init, ># For use with Plustek parallel-port scanners and<
[plustek] sane_init, ># LM9831/2 based USB scanners<
[plustek] sane_init, >#<
[plustek] sane_init, ># For parport devices use the parport section<
[plustek] sane_init, >#<
[plustek] sane_init, >[parport]<
[plustek] next device is a PARPORT device
[plustek] sane_init, >device /dev/pt_drv<
[plustek] Decoding device name >/dev/pt_drv<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># leave the default values as specified in 
/etc/modules.conf<
[plustek] sane_init, >#<
[plustek] sane_init, >warmup    -1<
[plustek] ignoring >warmup    -1<
[plustek] sane_init, >lOffOnEnd -1<
[plustek] ignoring >lOffOnEnd -1<
[plustek] sane_init, >lampOff   -1<
[plustek] ignoring >lampOff   -1<
[plustek] sane_init, ><
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># The USB section<
[plustek] sane_init, ># each device needs at least two lines:<
[plustek] sane_init, ># - [usb] vendor-ID and product-ID<
[plustek] sane_init, ># - device devicename<
[plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] sane_init, ># [usb] 0x07B3 0x0017<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># additionally you can specify some options<
[plustek] sane_init, ># warmup, lOffOnEnd, lampOff<
[plustek] sane_init, >#<
[plustek] sane_init, ># For autodetection<
[plustek] sane_init, ># [usb]<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ><
[plustek] sane_init, >[usb] 0x07B3 0x0017<
[plustek] attach (/dev/pt_drv, 0xbfffcf20, (nil))
[plustek] Device configuration:
[plustek] device name  : >/dev/pt_drv<
[plustek] porttype     : 0
[plustek] USB-ID       : ><
[plustek] warmup       : -1s
[plustek] lampOff      : -1
[plustek] lampOffOnEnd : -1
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] open: can't open /dev/pt_drv as a device
[plustek] open failed: -1
[plustek] next device is a USB device (0x07B3-0x0017)
[plustek] next device is an USB device
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># options for the previous USB entry<
[plustek] sane_init, >#<
[plustek] sane_init, ># switch lamp off after xxx secs, 0 disables the 
feature<
[plustek] sane_init, >option lampOff 0<
[plustek] Decoding option >lampOff<
[plustek] sane_init, ><
[plustek] sane_init, ># warmup period in seconds, 0 means no warmup<
[plustek] sane_init, >option warmup 180<
[plustek] Decoding option >warmup<
[plustek] sane_init, ><
[plustek] sane_init, ># 0 means leave lamp-status untouched, not 0 means 
switch off<
[plustek] sane_init, ># on sane_close<
[plustek] sane_init, >option lOffOnEnd 0<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># and of course the device-name<
[plustek] sane_init, >#<
[plustek] sane_init, >device /dev/usbscanner<
[plustek] Decoding device name >/dev/usbscanner<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># to define a new device, start with a new section:<
[plustek] sane_init, ># [usb] or [parport]<
[plustek] sane_init, >#<
[plustek] attach (/dev/usbscanner, 0xbfffcf20, (nil))
[plustek] Device configuration:
[plustek] device name  : >/dev/usbscanner<
[plustek] porttype     : 1
[plustek] USB-ID       : >0x07B3-0x0017<
[plustek] warmup       : 180s
[plustek] lampOff      : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usbscanner,0x07B3-0x0017)
[plustek] open failed: -1
[dll] init: backend `plustek' is version 1.0.0
[plustek] sane_get_devices (0xbfffefd8, 0)
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `plustek's exit function
[plustek] sane_exit
[dll] sane_exit: finished
karsten@nathan:~>

------------------------

the modul pt_drv is not load. I checked it just in this moment.
Even now, the output from
"scanimage -L" ist just the same if I load the modul pt_drv.

I think it is more than only something missing from the installation.
Because the modul pt_drv will not automatically be load.

mfg

Karsten

-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680

Okay now we have the plustek backend back!
You now have to make sure, that the pt_drv is loaded...
and that the device node exists - think about one of the last
mails where you send me the output of lsmod:
[SNIP]
nathan:/home/karsten # lsmod
Module                  Size  Used by    Tainted: P
pt_drv                111264   0  (unused)
snd-pcm-oss            45152   1  (autoclean)
snd-mixer-oss          11136   1  (autoclean)
NVdriver              946752  10  (autoclean)
parport_pc             25448   2  (autoclean)
lp                      5824   0  (autoclean)
parport                21856   2  (autoclean) [pt_drv parport_pc lp]
[SNAP]

That's all...
 Gerhard

-------------------------
gerhard AT gjaeger DOT de

Hi Gerhard,

sorry, but it don't work. :-(
Am Sonntag, 23. Juni 2002 12:14 schrieb Jaeger, Gerhard:
> Okay now we have the plustek backend back!
> You now have to make sure, that the pt_drv is loaded...

I think this is the problem, if you will look at the following lines
Scanimage said, that it can't open the pt_drv device:
-----------
[plustek] open: can't open /dev/pt_drv as a device
-----------

> and that the device node exists - think about one of the last
> mails where you send me the output of lsmod:
> [SNIP]
> nathan:/home/karsten # lsmod
> Module                  Size  Used by    Tainted: P
> pt_drv                111264   0  (unused)
> snd-pcm-oss            45152   1  (autoclean)
> snd-mixer-oss          11136   1  (autoclean)
> NVdriver              946752  10  (autoclean)
> parport_pc             25448   2  (autoclean)
> lp                      5824   0  (autoclean)
> parport                21856   2  (autoclean) [pt_drv parport_pc lp]
> [SNAP]

I have done and made a check nothing was going on.
take a look of all steps:
---------------------------------------------------------------------
karsten@nathan:~> su
Password:
nathan:/home/karsten # lsmod
Module                  Size  Used by    Tainted: P
snd-pcm-oss            45152   1  (autoclean)
snd-mixer-oss          11136   1  (autoclean)
NVdriver              946752  10  (autoclean)
parport_pc             25448   1  (autoclean)
lp                      5824   0  (autoclean)
parport                21856   1  (autoclean) [parport_pc lp]
snd-ens1371            12036   2
snd-pcm                58528   0  [snd-pcm-oss snd-ens1371]
snd-timer              11456   0  [snd-pcm]
snd-rawmidi            13536   0  [snd-ens1371]
snd-seq-device          4336   0  [snd-rawmidi]
snd-ac97-codec         24196   0  [snd-ens1371]
snd                    31720   0  [snd-pcm-oss snd-mixer-oss snd-ens1371 
snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec]
soundcore               3268   6  [snd]
ipv6                  123424  -1  (autoclean)
joydev                  5728   0  (unused)
evdev                   3904   0  (unused)
input                   3072   0  [joydev evdev]
st                     25844   0  (autoclean) (unused)
sg                     23620   0  (autoclean)
usb-uhci               20996   0  (unused)
usbcore                55136   1  [usb-uhci]
ne2k-pci                4800   1
8390                    5856   0  [ne2k-pci]
hisax                 500452   4
isdn                  119104   6  [hisax]
slhc                    4432   1  [isdn]
isa-pnp                27816   0  [hisax]
ide-scsi                7648   0
reiserfs              158816   1
nathan:/home/karsten # insmod pt_drv
Using /lib/modules/2.4.18-4GB/misc/pt_drv.o
nathan:/home/karsten # lsmod
Module                  Size  Used by    Tainted: P
pt_drv                135392   0  (unused)
snd-pcm-oss            45152   1  (autoclean)
snd-mixer-oss          11136   1  (autoclean)
NVdriver              946752  10  (autoclean)
parport_pc             25448   2  (autoclean)
lp                      5824   0  (autoclean)
parport                21856   2  (autoclean) [pt_drv parport_pc lp]
snd-ens1371            12036   2
snd-pcm                58528   0  [snd-pcm-oss snd-ens1371]
snd-timer              11456   0  [snd-pcm]
snd-rawmidi            13536   0  [snd-ens1371]
snd-seq-device          4336   0  [snd-rawmidi]
snd-ac97-codec         24196   0  [snd-ens1371]
snd                    31720   0  [snd-pcm-oss snd-mixer-oss snd-ens1371 
snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec]
soundcore               3268   6  [snd]
ipv6                  123424  -1  (autoclean)
joydev                  5728   0  (unused)
evdev                   3904   0  (unused)
input                   3072   0  [joydev evdev]
st                     25844   0  (autoclean) (unused)
sg                     23620   0  (autoclean)
usb-uhci               20996   0  (unused)
usbcore                55136   1  [usb-uhci]
ne2k-pci                4800   1
8390                    5856   0  [ne2k-pci]
hisax                 500452   4
isdn                  119104   6  [hisax]
slhc                    4432   1  [isdn]
isa-pnp                27816   0  [hisax]
ide-scsi                7648   0
reiserfs              158816   1
nathan:/home/karsten # exit
exit
karsten@nathan:~> scanimage -L
karsten@nathan:~> xsane
karsten@nathan:~> export SANE_DEBUG_DLL=255
karsten@nathan:~> export SANE_DEBUG_PLUSTEK=12
karsten@nathan:~> scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.5 from sane-backends-1.0.7
[dll] add_backend: adding backend plustek
[dll] load: loading backend plustek
[dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.7
[plustek] sane_init, ># Plustek-SANE Backend configuration file<
[plustek] sane_init, ># For use with Plustek parallel-port scanners and<
[plustek] sane_init, ># LM9831/2 based USB scanners<
[plustek] sane_init, >#<
[plustek] sane_init, ># For parport devices use the parport section<
[plustek] sane_init, >#<
[plustek] sane_init, >[parport]<
[plustek] next device is a PARPORT device
[plustek] sane_init, >device /dev/pt_drv<
[plustek] Decoding device name >/dev/pt_drv<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># leave the default values as specified in 
/etc/modules.conf<
[plustek] sane_init, >#<
[plustek] sane_init, >warmup    -1<
[plustek] ignoring >warmup    -1<
[plustek] sane_init, >lOffOnEnd -1<
[plustek] ignoring >lOffOnEnd -1<
[plustek] sane_init, >lampOff   -1<
[plustek] ignoring >lampOff   -1<
[plustek] sane_init, ><
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># The USB section<
[plustek] sane_init, ># each device needs at least two lines:<
[plustek] sane_init, ># - [usb] vendor-ID and product-ID<
[plustek] sane_init, ># - device devicename<
[plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] sane_init, ># [usb] 0x07B3 0x0017<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># additionally you can specify some options<
[plustek] sane_init, ># warmup, lOffOnEnd, lampOff<
[plustek] sane_init, >#<
[plustek] sane_init, ># For autodetection<
[plustek] sane_init, ># [usb]<
[plustek] sane_init, ># device /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ><
[plustek] sane_init, >[usb] 0x07B3 0x0017<
[plustek] attach (/dev/pt_drv, 0xbfffcf20, (nil))
[plustek] Device configuration:
[plustek] device name  : >/dev/pt_drv<
[plustek] porttype     : 0
[plustek] USB-ID       : ><
[plustek] warmup       : -1s
[plustek] lampOff      : -1
[plustek] lampOffOnEnd : -1
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] open: can't open /dev/pt_drv as a device
[plustek] open failed: -1
[plustek] next device is a USB device (0x07B3-0x0017)
[plustek] next device is an USB device
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># options for the previous USB entry<
[plustek] sane_init, >#<
[plustek] sane_init, ># switch lamp off after xxx secs, 0 disables the 
feature<
[plustek] sane_init, >option lampOff 0<
[plustek] Decoding option >lampOff<
[plustek] sane_init, ><
[plustek] sane_init, ># warmup period in seconds, 0 means no warmup<
[plustek] sane_init, >option warmup 180<
[plustek] Decoding option >warmup<
[plustek] sane_init, ><
[plustek] sane_init, ># 0 means leave lamp-status untouched, not 0 means 
switch off<
[plustek] sane_init, ># on sane_close<
[plustek] sane_init, >option lOffOnEnd 0<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># and of course the device-name<
[plustek] sane_init, >#<
[plustek] sane_init, >device /dev/usbscanner<
[plustek] Decoding device name >/dev/usbscanner<
[plustek] sane_init, ><
[plustek] sane_init, >#<
[plustek] sane_init, ># to define a new device, start with a new section:<
[plustek] sane_init, ># [usb] or [parport]<
[plustek] sane_init, >#<
[plustek] attach (/dev/usbscanner, 0xbfffcf20, (nil))
[plustek] Device configuration:
[plustek] device name  : >/dev/usbscanner<
[plustek] porttype     : 1
[plustek] USB-ID       : >0x07B3-0x0017<
[plustek] warmup       : 180s
[plustek] lampOff      : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usbscanner,0x07B3-0x0017)
[plustek] open failed: -1
[dll] init: backend `plustek' is version 1.0.0
[plustek] sane_get_devices (0xbfffefd8, 0)
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `plustek's exit function
[plustek] sane_exit
[dll] sane_exit: finished
karsten@nathan:~>

---------------------------------------------------------------------
First I checked the modules, because I already filled in the lines in the 
/etc/modules.conf
------------
alias char-major-40	pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0
------------
normaly the module pt_drv must be load automatically, but it will not .
In teh first part you see it is not there.
Then I loaded the module
pt_drv
with insmod and it is there.
If I made "scanimage -L" nothing happened, even mot the lamp is starting.
I startet xsane and Xsane said there is no scanner reachable.
Now I made that from your last mail with the debug and I think that there must 
be something other. Because of plustek and the line

[plustek] open: can't open /dev/pt_drv as a device

I don't know why it happened.

I hope you know a way to help me. With the SuSE 7.1 and also with the 
mandrake 7.2 your driver was working fine. Only my pc was not realy working so 
good. Now I'm lucky with my pc but the driver is not more working.

Still one question
I've made a copy of the lines during the installation
Waht does the following line mean:
---------------
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver # make install
mkdir -p /lib/modules/2.4.18-4GB/misc
install -c -m "644" pt_drv.o /lib/modules/2.4.18-4GB/misc
/sbin/depmod -a
depmod: *** Unresolved symbols in /lib/modules/misc/pt_drv.o
nathan:/home/karsten/Plustek-Treiber0.41/plustek_driver #
---------------
The driver is missing there something but I don't know what.

mfg

Karsten
-- 
Karsten Giesow
Adolf-Donders-Allee 32
46419 Isselburg-Anholt
Tel.: 0172/1655696
Fax: 02874/902680