[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
4830P Problem
From: ####@####.#### (Robert Fendt) Date: 27 Feb 2003 21:19:17 -0000 Message-Id: <29601179.546403A6.00218405@netscape.net> Hi, some time ago I wrote to the list because I had problems with my Plustek OpticPro 4830P. Gerhard wrote to export SANE_DEBUG_PLUSEK=12 and to scanimage .... That's what I did and here is the output: ********************************************************************** [sanei_debug] Setting debug level of plustek to 12. [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9 [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with Plustek parallel-port scanners and< [plustek] ># LM9831/2/3 based USB scanners< [plustek] >#< [plustek] ># For parport devices use the parport section< [plustek] >#< [plustek] >[parport]< [plustek] next device is a PARPORT device [plustek] >device /dev/pt_drv< [plustek] Decoding device name >/dev/pt_drv< [plustek] >< [plustek] >#< [plustek] ># leave the default values as specified in /etc/modules.conf< [plustek] >#< [plustek] >option warmup -1< [plustek] Decoding option >warmup< [plustek] >option lOffOnEnd -1< [plustek] Decoding option >lOffOnEnd< [plustek] >option lampOff -1< [plustek] Decoding option >lampOff< [plustek] >< [plustek] >< [plustek] >#< [plustek] ># The USB section:< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] >#< [plustek] >< [plustek] >[usb]< [plustek] attach (/dev/pt_drv, 0xbfffd6cc, (nil)) [plustek] Device configuration: [plustek] device name : >/dev/pt_drv< [plustek] porttype : 0 [plustek] USB-ID : >< [plustek] warmup : -1s [plustek] lampOff : -1 [plustek] lampOffOnEnd : -1 [plustek] skipCalibr. : 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] drvopen() [plustek] open failed: -9021 [plustek] next device is a USB device (autodetection) [plustek] next device is an USB device [plustek] >< [plustek] >#< [plustek] ># options for the previous USB entry< [plustek] >#< [plustek] ># switch lamp off after xxx secs, 0 disables the feature< [plustek] >option lampOff 0< [plustek] Decoding option >lampOff< [plustek] >< [plustek] ># warmup period in seconds, 0 means no warmup< [plustek] >option warmup 30< [plustek] Decoding option >warmup< [plustek] >< [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] ># on sane_close< [plustek] >option lOffOnEnd 0< [plustek] Decoding option >lOffOnEnd< [plustek] >< [plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] >< [plustek] ># for transparencies< [plustek] >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] >< [plustek] ># for negatives< [plustek] >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] >< [plustek] >#< [plustek] ># for setting the calibration strip position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] ># -1 means use built in< [plustek] >#< [plustek] >option posShadingY -1< [plustek] Decoding option >posShadingY< [plustek] >option tpaShadingY -1< [plustek] Decoding option >tpaShadingY< [plustek] >option negShadingY -1< [plustek] Decoding option >negShadingY< [plustek] >< [plustek] >#< [plustek] ># to invert the negatives, 0 disables the feature< [plustek] >#< [plustek] >option invertNegatives 0< [plustek] Decoding option >invertNegatives< [plustek] >< [plustek] ># for skipping calibration step< [plustek] >option skipCalibration 0< [plustek] Decoding option >skipCalibration< [plustek] >< [plustek] ># for replacing the gain values found during< [plustek] ># calibration< [plustek] >option red_gain -1< [plustek] Decoding option >red_gain< [plustek] >option green_gain -1< [plustek] Decoding option >green_gain< [plustek] >option blue_gain -1< [plustek] Decoding option >blue_gain< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] ># use values of 2.5 for CanoScan< [plustek] >#< [plustek] >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] >option greenGamma 1.0< [plustek] Decoding option >greenGamma< [plustek] >option blueGamma 1.0< [plustek] Decoding option >blueGamma< [plustek] >option grayGamma 1.0< [plustek] Decoding option >grayGamma< [plustek] >< [plustek] >#< [plustek] ># to enable TPA (non Plustek devices only)< [plustek] ># 0 means default behaviour as specified in the internal tables< [plustek] ># 1 means enable< [plustek] >#< [plustek] >option enableTPA 0< [plustek] Decoding option >enableTPA< [plustek] >< [plustek] >#< [plustek] ># and of course the device-name< [plustek] >#< [plustek] >device /dev/usbscanner< [plustek] Decoding device name >/dev/usbscanner< [plustek] >< [plustek] >#< [plustek] ># to define a new device, start with a new section:< [plustek] ># [usb] or [parport]< [plustek] >#< [plustek] attach (/dev/usbscanner, 0xbfffd6cc, (nil)) [plustek] Device configuration: [plustek] device name : >/dev/usbscanner< [plustek] porttype : 1 [plustek] USB-ID : >< [plustek] warmup : 30s [plustek] lampOff : 0 [plustek] lampOffOnEnd : 0 [plustek] skipCalibr. : 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] drvopen() [plustek] usbDev_open(/dev/usbscanner,) [plustek] open failed: -1 [plustek] sane_open - /dev/pt_drv0 [plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708) [plustek] open failed: -1 [plustek] sane_open - /dev/pt_drv0 [plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708) [plustek] Device configuration: [plustek] device name : >< [plustek] porttype : 0 [plustek] USB-ID : >< [plustek] warmup : 0s [plustek] lampOff : 0 [plustek] lampOffOnEnd : 0 [plustek] skipCalibr. : 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: 0 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: 0 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: 0 [plustek] red gain : 0 [plustek] green gain : 0 [plustek] blue gain : 0 [plustek] red Gamma : 0.00 [plustek] green Gamma : 0.00 [plustek] blue Gamma : 0.00 [plustek] gray Gamma : 0.00 [plustek] --------------------- [plustek] drvopen() [plustek] open: can't open /dev/pt_drv0 as a device [plustek] open failed: -1 [plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708) [plustek] Device configuration: [plustek] device name : >< [plustek] porttype : 1 [plustek] USB-ID : >< [plustek] warmup : 0s [plustek] lampOff : 0 [plustek] lampOffOnEnd : 0 [plustek] skipCalibr. : 0 [plustek] invertNegs. : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: 0 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: 0 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: 0 [plustek] red gain : 0 [plustek] green gain : 0 [plustek] blue gain : 0 [plustek] red Gamma : 0.00 [plustek] green Gamma : 0.00 [plustek] blue Gamma : 0.00 [plustek] gray Gamma : 0.00 [plustek] --------------------- [plustek] drvopen() [plustek] usbDev_open(/dev/pt_drv0,) [plustek] open failed: -1 scanimage: open of device plustek:/dev/pt_drv0 failed: Error during device I/O [plustek] sane_exit ********************************************************************* Another thing that might help: sometimes the driver sees a 6000/6000P type scanner instead of the 4830P (??) Thanks for helping, Robert __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: 4830P Problem
From: "Jaeger, Gerhard" ####@####.#### Date: 1 Mar 2003 16:25:24 -0000 Message-Id: <200303011649.08674.gerhard@gjaeger.de> Hi On Donnerstag, 27. Februar 2003 22:07, Robert Fendt wrote: > Hi, > some time ago I wrote to the list because I had problems with my Plustek > OpticPro 4830P. Gerhard wrote to > > export SANE_DEBUG_PLUSEK=12 and to > scanimage .... > That's what I did and here is the output: > okay this output isn't of much help here -sorry. Please enable the debug output of the ptdrv module, then reinstall and reload the module. then start scanimage again and send us the output of dmesg... We hopefully get a hint what's going wrong, as the device is detected... Cheers Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |