gnupic: How to use idata ?
Subject:
Re: How to use idata ?
From:
feqin fan ####@####.####
Date:
21 Dec 2012 01:21:46 -0000
Message-Id: <CAOfAq_p-Bgipi5XZ26YGy1EzkJbwKCKZLQeFNz9Vi1YCHJF19A@mail.gmail.com>
Thanks very much.
My Regards.
2012/12/21 Joe Pfeiffer ####@####.####
> Exactly -- you have to move it yourself. I found a good discussion of
> what's needed at
>
> http://www.microchip.com/forums/m27382.aspx
>
> feqin fan writes:
> >Hello,guys.
> >
> >write this code:
> >
> >init_data idata
> > db 0x12
> > db 0x13, 0x14, 0x15
> >
> > code
> > movf (init_data + 2), W
> >
> > end
> >
> >
> >
> >this can not work, the data of init_data is in flash, I have look up the
> >HEX file,there is no code get the data from flash to ram before the value
> >is used( movf (init_data + 2), W ).
> >
> >Why there is no code..??
> >
> >thanks.
> >
> >
> >
> >
> >--
> >*live long and prosper..*
>
> --
> Joseph J. Pfeiffer, Jr., Ph.D. http://pfeifferfamily.net/
> 1440 Tierra del Sol Dr 575.525.2764 (H)
> Las Cruces, NM 88007 575.496.3501 (C)
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
--
*live long and prosper..*