gnupic: Thread: Re:How to use idata ?

Exactly -- you have to move it yourself.  I found a good discussion of
what's needed at

http://www.microchip.com/forums/m27382.aspx

feqin fan writes:
>Hello,guys.
>
>write this code:
>
>init_data    idata
>        db 0x12
>        db 0x13, 0x14, 0x15
>
>    code
>        movf (init_data + 2), W
>
>    end
>
>
>
>this can not work, the data of init_data is in flash, I have look up the
>HEX file,there is no code get the data from flash to ram before the value
>is used( movf (init_data + 2), W ).
>
>Why there is no code..??
>
>thanks.
>
>
>
>
>-- 
>*live long and prosper..*

-- 
Joseph J. Pfeiffer, Jr., Ph.D.                 http://pfeifferfamily.net/
1440 Tierra del Sol Dr                         575.525.2764 (H)
Las Cruces, NM 88007                           575.496.3501 (C)