plustek: CanoScan N670U
Subject:
Re: CanoScan N670U
From:
"Jaeger, Gerhard" ####@####.####
Date:
5 Dec 2002 20:28:02 -0000
Message-Id: <18K2V5-0lLR5MC@fmrl00.sul.t-online.com>
Hi,
On Thursday, 5. December 2002 19:49, Stephan Litterst wrote:
> Hi there,
>
> ...some problems with CanoScan N67OU.
Bad...
>
> The stuff I used:
> sane-backends-1.0.9.tar.gz
> xsane-0.89.tar.gz
> plustek-0.45-TEST3.tar.gz
> (let me know if you need some additional information...)
Don't think so (hopefully)
>
> The good things:
> sane-find-scanner finds the scanner.
> scanimage -L works fine.
Okay.
>
> The bad things:
> When I use scanimage (without the -L option) or xsane the scanner-light
> goes on and the scanner moves to the startposition (I hope its the
> startposition...). Thats all. No Scanning. No picture. Nothing. Hmm...
> When I cancel the scanning the light in the scanner is still on.
>
> Any ideas?
Yeap! Check your plustek.conf file:
option warmup
should be set and that's why you see the sensor moving back
and then waiting for lamp warmup, set this option to 0 and there's
no warmup...
The light will be switched off when leaving the backend if the option
lOffOnEnd is set to 1
Cheers
Gerhard
