plustek: OptikPro 4800 on Ubuntu 7.04
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From:
Beate und Gregor Koch ####@####.####
Date:
24 May 2007 19:50:32 +0100
Message-Id: <1180032599.5573.3.camel@aragorn>
Am Donnerstag, den 24.05.2007, 07:34 +0200 schrieb Gerhard Jaeger:
> On Dienstag, 22. Mai 2007, Beate und Gregor Koch wrote:
> > Hey,
> > I have an OpticPro 8400 parport scanner on Ubuntu 7.04 64 bit.
> > Xsane and scanimage are detekting the scanner korrect. When I scan, then
> > goes the Lamp out after the warming time, and the scan starts. Most time
> > I get then an IO-Error.
> > libsane 1.0.18
> > xsane 0.99
> >
> In the end it is a timing problem :( You might should try and compile
> the backend as kernel-module which should work better.
>
> While scanning, what is the output if you enable the debug-messages?
> i.e.: export SANE_PLUSTEK_PP_DEBUG=25 ; xsane
>
> - Gerhard
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
Hey Gerhard,
I tryed to build the module, and get this:
####@####.####
sudo ./MakeModule.sh
Password:
This script will try and build a suitable kernel-module for your system.
If you'd like to make the module WITH debug output, restart this script
with as follows:
./MakeModule.sh DEBUG=y
Press <ENTER> to continue or <CTRL><C> to cancel.
Check for root - done.
Check for kernelversion:
Using makefile for kernel 2.6.x
Build-directory:
/tmp/sane-backends-1.0.18/doc/plustek/build
Removing build-directory - done.
Creating build-directory - done.
Linking source files - done.
Copying Makefile to build-directory - done.
Making the module...
make: Gehe in Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic'
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_dac.o
CC
[M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_detect.o
CC
[M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_genericio.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_image.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_map.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_misc.o
CC
[M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_models.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_io.o
CC
[M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_procfs.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_motor.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_p9636.o
CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.o
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:178:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:181:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:184:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:187:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:190:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:193:
Fehler: expected »)« before string constant
/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:196:
Fehler: expected »)« before string constant
make[1]: ***
[/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.o] Fehler
1
make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler 2
make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic'
There were some build errors...
####@####.####
gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c
####@####.####
Whats wrong?
Thanks
Gregor
