plustek: Q: Support for OpticPro 19200S ?
Subject:
Re: Q: Support for OpticPro 19200S ?
From:
Juergen Goeritz ####@####.####
Date:
14 Jul 2000 09:19:39 -0000
Message-Id: <Pine.LNX.3.96.1000714112002.31588A-100000@redwood.oekomm.de>
Hello Gerhard,
thanks a lot for your reply.
I just found out some additional information. The scanner
is already in the list as a remake of an ARTEC scanner but
I did only find it by chance.
Would it be enough to mention it in the Plustek list
and just put in a link to the sane-artec package?
Best regards
jg
--
Dipl.-Inform.(FH) Jürgen Göritz
Internet http://www.oekomm.de/
Email ####@####.####
Phone +49 (0)7240 202440
Fax +49 (0)7240 202448
Mail Oekomm Vernetzungstechnik GmbH
Wesebachstrasse 49a
76327 Pfinztal
Germany
On Fri, 14 Jul 2000, Jaeger, Gerhard wrote:
> On Fre, 14 Jul 2000, you wrote:
> > Hello,
> >
> > some days ago a Plustek Optic Pro 19200S flatbed
> > scanner coming with a PCI SCSI-2 controller made
> > its way to me. The optical resolution is 600 dpi
> > with 36 bits of color.
> >
> > So far, I couldn't find any information about this
> > model in the SANE webpages.
> > Maybe it is already supported without notice?
> > Or could I help with some testing?
> >
> > Any hints or help would be appreciated very much.
>
> Hi Juergen,
>
> currently there's no support for the Plustek SCSI scanner.
> The Plustek-backend and driver is only capable to control
> parallel port scanner.
>
> I also do not have any information about the SCSI scanner.
> Maybe you can have a look inside the scanner and tell me
> what ASICs there are inside. This may will enable us to
> merge current SCSI code and ASIC-control code to obtain
> support for the 19200S.
>
> Bye
> Gerhard
>
