[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Problems with loading the driver
From: Krzysztof Gozdziewski ####@####.#### Date: 8 Jun 2000 10:27:55 -0000 Message-Id: <Pine.LNX.4.10.10006081244320.2650-100000@lynx.astri.uni.torun.pl> Hello, I would like to ask you for help. My config: software: kernel 2.2.14 compiled on Mandrake 6.1 plustek-driver-sane-0.35 sane 1.0.1 hardware: plustek OP 96000P I have compiled the driver and installed it, also the scanner device seems to exist [root@lynx src]# ls -la /dev/pt_drv crw-rw-r-- 1 root root 40, 0 cze 7 22:23 /dev/pt_drv My conf.modules is like that alias parport parport_pc options parport_pc io=0x378,0x278 irq=7,auto alias char-major-40 pt_drv post-install pt_drv modprobe -k parport options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 legal=0 When I try [root@lynx src]# modprobe parport [root@lynx src]# modprobe pt_drv /lib/modules/2.2.14/misc/pt_drv.o: init_module: Device or resources are busy parport: Devices or resoures are busy the same with insmod -f pt_drv In /var/log/messages I have Jun 8 12:49:42 lynx kernel: - no need to restore portmode ! Jun 8 12:49:42 lynx kernel: Releasing parport Jun 8 12:49:42 lynx kernel: ptdrvShutdown() Jun 8 12:49:42 lynx kernel: pt_drv: init failed - ret = -9020 Jun 8 12:49:42 lynx kernel: --------------------------------------------- I was so happy to see the support for Plustek and now... It seems I have something stupid small to do. But I don't know what. Please reply to my e-mail address, I am not a subscriber of this list. With regards Chris -- Krzysztof Gozdziewski Torun Centre for Astronomy, Poland http://www.astri.uni.torun.pl/~chris | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Problems with loading the driver
From: Krzysztof Gozdziewski ####@####.#### Date: 8 Jun 2000 12:14:08 -0000 Message-Id: <Pine.LNX.4.10.10006081436180.737-100000@lynx.astri.uni.torun.pl> I am sorry for a noise, because the problem was in hardware, lpt connector was improperly mounted on the motherboard. After fixing the problem I checked that Gerhard's driver works without any problems. I am trying to scan images now. My config is plustek driver 0.36/ Optic Pro 96000P/ kernel 2.2.14. Regards, Chris > > When I try > [root@lynx src]# modprobe parport > [root@lynx src]# modprobe pt_drv > /lib/modules/2.2.14/misc/pt_drv.o: init_module: Device or resources are busy > parport: Devices or resoures are busy > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |