plustek: Thread: pt_drv

	Dear Sirs,

	My name is Sandro Lemos Machado and I am trying to install the Plustek 
Driver together with Sane. Following the Howto proposed, when I type 
“make -f Makefile load” the message “no dependencies were found to 
pr_drv”. So, I inserted the module with insmod and compiled the Sane. 
Now, when I try to get the scanner, the following menssage appears: 
“can't open /dev/pt_drv as a drive” “attach: open failure: Error during 
device I/O. 
	One interesting thing is that the scanner ligth turns on as the same 
time as the computer.

	What I can do?

				Best regards,

									Sandro Lemos Machado

Hi Sandro,

have a look the sane-configuration in /etc/sane.d/dll.conf
there you need a plustek entry (see the example in backend/dll.conf).
If this entry doesn't exist, please add it.

Gerhard

Hallo,

I have a problem with my scanner Plustek Optic Pro 6000P under SuSE 7.1.
Compiling goes without problems, but
make load    or
modprobe pt_drv says:
device or ressource busy
With Windows I have not problems with scanning.
I have enabled the debug modus, hier is the result:
Mar 31 02:15:45 sonne kernel: *********************************************
Mar 31 02:15:45 sonne kernel: pt_drv: init_module()
Mar 31 02:15:45 sonne kernel: pt_drv : driver version 0.37-24
Mar 31 02:15:45 sonne kernel: ptdrvInit(0)
Mar 31 02:15:45 sonne kernel: Init settings done
Mar 31 02:15:45 sonne kernel: ScanData = 0xc311c000
Mar 31 02:15:45 sonne kernel: Requested port at 0x378
Mar 31 02:15:45 sonne kernel: Requested port (0x378) found
Mar 31 02:15:45 sonne kernel: Port mode reported: (0x0007)
Mar 31 02:15:45 sonne kernel: Port for device 0 registered
Mar 31 02:15:45 sonne kernel: ptdrvOpen(port=0x378)
Mar 31 02:15:45 sonne kernel: Try to claim the parport
Mar 31 02:15:45 sonne kernel: parport-modi: SPP PS/2 EPP
Mar 31 02:15:45 sonne kernel: Using EPP-mode
Mar 31 02:15:45 sonne kernel: Trying faster mode...
Mar 31 02:15:45 sonne kernel: Starting Scanner-Autodetection
Mar 31 02:15:45 sonne kernel: ************ DETECTP48xx ************
Mar 31 02:15:45 sonne kernel: ModelSet4800()
Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
Mar 31 02:15:45 sonne kernel: A4 set
Mar 31 02:15:45 sonne kernel: ModelSet4800() done.
Mar 31 02:15:45 sonne kernel: P48xxInitAsic()
Mar 31 02:15:45 sonne kernel: DacInitialize()
Mar 31 02:15:45 sonne kernel: ImageInitialize()
Mar 31 02:15:45 sonne kernel: IOFuncInitialize()
Mar 31 02:15:45 sonne kernel: IOInitialize()
Mar 31 02:15:45 sonne kernel: MotorInitialize()
Mar 31 02:15:45 sonne kernel: Dataport = 0x0378
Mar 31 02:15:45 sonne kernel: Ctrlport = 0x037a
Mar 31 02:15:45 sonne kernel: Test 0x55
Mar 31 02:15:45 sonne kernel: Test 0xAA
Mar 31 02:15:45 sonne kernel: Compare data=0xe and status=0xe, port=0x378
Mar 31 02:15:45 sonne kernel: detectScannerConnection() returns -9021.
Mar 31 02:15:45 sonne kernel: ************ DETECTP9636 ************
Mar 31 02:15:45 sonne kernel: ModelSet9636()
Mar 31 02:15:45 sonne kernel: ModelSet9360()
Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
Mar 31 02:15:45 sonne kernel: A4 set
Mar 31 02:15:45 sonne kernel: ModelSet9630() done.
Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
Mar 31 02:15:45 sonne kernel: A4 set
Mar 31 02:15:45 sonne kernel: ModelSet9636() done.
Mar 31 02:15:45 sonne kernel: P9636InitAsic()
Mar 31 02:15:45 sonne kernel: DacInitialize()
Mar 31 02:15:45 sonne kernel: ImageInitialize()
Mar 31 02:15:45 sonne kernel: IOFuncInitialize()
Mar 31 02:15:45 sonne kernel: IOInitialize()
Mar 31 02:15:45 sonne kernel: MotorInitialize()
Mar 31 02:15:45 sonne kernel: AsicID = 0x10
Mar 31 02:15:45 sonne kernel: ptdrvClose()
Mar 31 02:15:45 sonne kernel: MiscRestorePort()
Mar 31 02:15:45 sonne kernel: - no need to restore portmode !
Mar 31 02:15:45 sonne kernel: Releasing parport
Mar 31 02:15:45 sonne kernel: ptdrvShutdown()
Mar 31 02:15:45 sonne kernel: cleanup device 0
Mar 31 02:15:45 sonne kernel: Lamp-Timer stopped !
Mar 31 02:15:45 sonne kernel: Try to claim the parport
Mar 31 02:15:45 sonne kernel: Releasing parport
Mar 31 02:15:45 sonne kernel: Port unregistered
Mar 31 02:15:45 sonne kernel: pt_drv : no device(s) detected, (-9020)
Mar 31 02:15:45 sonne kernel: ---------------------------------------------

If I make modprobe pt_drv, the lamp goes on, but nothing more.
/dev/pt_drv I have  generated manuelly.
Can you help me? Thankful for each information.
Greetings
andreas

-- 
Diese Nachricht wurde durch einen freilaufenden Pinguin
aus artgerechter Bodentierhaltung ohne
Mikrosoftschen Viren erstellt

Hi,

sometimes the IEEE1248 readback stuff from the parport
make trouble, as this module sends commands to each parport-device
and they cause the misdetection....

Please disable this in your kernel configuration (PnP-Support menu).
And recompile the modules...

Gerhard

On Saturday, 31. March 2001 03:08, Andreas Grund wrote:
> Hallo,
>
> I have a problem with my scanner Plustek Optic Pro 6000P under SuSE 7.1.
> Compiling goes without problems, but
> make load    or
> modprobe pt_drv says:
> device or ressource busy
> With Windows I have not problems with scanning.
> I have enabled the debug modus, hier is the result:
> Mar 31 02:15:45 sonne kernel: *********************************************
> Mar 31 02:15:45 sonne kernel: pt_drv: init_module()
> Mar 31 02:15:45 sonne kernel: pt_drv : driver version 0.37-24
> Mar 31 02:15:45 sonne kernel: ptdrvInit(0)
> Mar 31 02:15:45 sonne kernel: Init settings done
> Mar 31 02:15:45 sonne kernel: ScanData = 0xc311c000
> Mar 31 02:15:45 sonne kernel: Requested port at 0x378
> Mar 31 02:15:45 sonne kernel: Requested port (0x378) found
> Mar 31 02:15:45 sonne kernel: Port mode reported: (0x0007)
> Mar 31 02:15:45 sonne kernel: Port for device 0 registered
> Mar 31 02:15:45 sonne kernel: ptdrvOpen(port=0x378)
> Mar 31 02:15:45 sonne kernel: Try to claim the parport
> Mar 31 02:15:45 sonne kernel: parport-modi: SPP PS/2 EPP
> Mar 31 02:15:45 sonne kernel: Using EPP-mode
> Mar 31 02:15:45 sonne kernel: Trying faster mode...
> Mar 31 02:15:45 sonne kernel: Starting Scanner-Autodetection
> Mar 31 02:15:45 sonne kernel: ************ DETECTP48xx ************
> Mar 31 02:15:45 sonne kernel: ModelSet4800()
> Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
> Mar 31 02:15:45 sonne kernel: A4 set
> Mar 31 02:15:45 sonne kernel: ModelSet4800() done.
> Mar 31 02:15:45 sonne kernel: P48xxInitAsic()
> Mar 31 02:15:45 sonne kernel: DacInitialize()
> Mar 31 02:15:45 sonne kernel: ImageInitialize()
> Mar 31 02:15:45 sonne kernel: IOFuncInitialize()
> Mar 31 02:15:45 sonne kernel: IOInitialize()
> Mar 31 02:15:45 sonne kernel: MotorInitialize()
> Mar 31 02:15:45 sonne kernel: Dataport = 0x0378
> Mar 31 02:15:45 sonne kernel: Ctrlport = 0x037a
> Mar 31 02:15:45 sonne kernel: Test 0x55
> Mar 31 02:15:45 sonne kernel: Test 0xAA
> Mar 31 02:15:45 sonne kernel: Compare data=0xe and status=0xe, port=0x378
> Mar 31 02:15:45 sonne kernel: detectScannerConnection() returns -9021.
> Mar 31 02:15:45 sonne kernel: ************ DETECTP9636 ************
> Mar 31 02:15:45 sonne kernel: ModelSet9636()
> Mar 31 02:15:45 sonne kernel: ModelSet9360()
> Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
> Mar 31 02:15:45 sonne kernel: A4 set
> Mar 31 02:15:45 sonne kernel: ModelSet9630() done.
> Mar 31 02:15:45 sonne kernel: modelInitPageSettings()
> Mar 31 02:15:45 sonne kernel: A4 set
> Mar 31 02:15:45 sonne kernel: ModelSet9636() done.
> Mar 31 02:15:45 sonne kernel: P9636InitAsic()
> Mar 31 02:15:45 sonne kernel: DacInitialize()
> Mar 31 02:15:45 sonne kernel: ImageInitialize()
> Mar 31 02:15:45 sonne kernel: IOFuncInitialize()
> Mar 31 02:15:45 sonne kernel: IOInitialize()
> Mar 31 02:15:45 sonne kernel: MotorInitialize()
> Mar 31 02:15:45 sonne kernel: AsicID = 0x10
> Mar 31 02:15:45 sonne kernel: ptdrvClose()
> Mar 31 02:15:45 sonne kernel: MiscRestorePort()
> Mar 31 02:15:45 sonne kernel: - no need to restore portmode !
> Mar 31 02:15:45 sonne kernel: Releasing parport
> Mar 31 02:15:45 sonne kernel: ptdrvShutdown()
> Mar 31 02:15:45 sonne kernel: cleanup device 0
> Mar 31 02:15:45 sonne kernel: Lamp-Timer stopped !
> Mar 31 02:15:45 sonne kernel: Try to claim the parport
> Mar 31 02:15:45 sonne kernel: Releasing parport
> Mar 31 02:15:45 sonne kernel: Port unregistered
> Mar 31 02:15:45 sonne kernel: pt_drv : no device(s) detected, (-9020)
> Mar 31 02:15:45 sonne kernel: ---------------------------------------------
>
> If I make modprobe pt_drv, the lamp goes on, but nothing more.
> /dev/pt_drv I have  generated manuelly.
> Can you help me? Thankful for each information.
> Greetings
> andreas

Hi Gerhard,

this is not the solution of my problem.
The PNP support was disabled.
I do not know what I can make.
I have installed the SuSE kernel 2.2.18.
Greetings
andreas

Okay Andreas,

the IEEE1248 stuff is not the problem!
Is there a printer attached? So remove it!

The following line in the log, should not appear that way:
> Mar 31 02:15:45 sonne kernel: Test 0xAA
> Mar 31 02:15:45 sonne kernel: Compare data=0xe and status=0xe, port=0x378

data and status MUST be different. In general this happens when:
- the parport hw seems to be out of order
- the scanner does not respond correctly

Maybe we have a timing problem on your system. You might have
a look into file plustek_driver/h/plustek_scan.h
There you will find outb and inb function calls. Please replace
every occurance of outb by outb_p and inb by inb_p, then 
recompile and reinstall the driver

Gerhard

Hi Gerhard, 

I have recompiled the modul pt_drv,
here is the new debug message:
Apr  5 15:31:21 sonne kernel: *********************************************
Apr  5 15:31:21 sonne kernel: pt_drv: init_module()
Apr  5 15:31:21 sonne kernel: pt_drv : driver version 0.37-24
Apr  5 15:31:21 sonne kernel: ptdrvInit(0)
Apr  5 15:31:21 sonne kernel: Init settings done
Apr  5 15:31:21 sonne kernel: ScanData = 0xc51e0000
Apr  5 15:31:21 sonne kernel: Requested port at 0x378
Apr  5 15:31:21 sonne kernel: parport0: PC-style at 0x378 [SPP,PS2,EPP]
Apr  5 15:31:21 sonne kernel: parport_probe: failed
Apr  5 15:31:21 sonne kernel: parport0: no IEEE-1284 device present.
Apr  5 15:31:21 sonne kernel: Requested port (0x378) found
Apr  5 15:31:21 sonne kernel: Port mode reported: (0x0007)
Apr  5 15:31:21 sonne kernel: Port for device 0 registered
Apr  5 15:31:21 sonne kernel: ptdrvOpen(port=0x378)
Apr  5 15:31:21 sonne kernel: Try to claim the parport
Apr  5 15:31:21 sonne kernel: parport-modi: SPP PS/2 EPP
Apr  5 15:31:21 sonne kernel: Using EPP-mode
Apr  5 15:31:21 sonne kernel: Trying faster mode...
Apr  5 15:31:21 sonne kernel: Starting Scanner-Autodetection
Apr  5 15:31:21 sonne kernel: ************ DETECTP48xx ************
Apr  5 15:31:21 sonne kernel: ModelSet4800()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4800() done.
Apr  5 15:31:21 sonne kernel: P48xxInitAsic()
Apr  5 15:31:21 sonne kernel: DacInitialize()
Apr  5 15:31:21 sonne kernel: ImageInitialize()
Apr  5 15:31:21 sonne kernel: IOFuncInitialize()
Apr  5 15:31:21 sonne kernel: IOInitialize()
Apr  5 15:31:21 sonne kernel: MotorInitialize()
Apr  5 15:31:21 sonne kernel: Dataport = 0x0378
Apr  5 15:31:21 sonne kernel: Ctrlport = 0x037a
Apr  5 15:31:21 sonne kernel: Test 0x55
Apr  5 15:31:21 sonne kernel: Test 0xAA
Apr  5 15:31:21 sonne kernel: Compare data=0x7e and status=0xe, port=0x378
Apr  5 15:31:21 sonne kernel: p48xxReadWriteTest()
Apr  5 15:31:21 sonne kernel: Found a 96003 ASIC at Reg 0x13
Apr  5 15:31:21 sonne kernel: ModelSet4830()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4830() done.
Apr  5 15:31:21 sonne kernel: p48xxDoTest()
Apr  5 15:31:21 sonne kernel: IODELAY = 0
Apr  5 15:31:21 sonne kernel: Bank 0 overwritten
Apr  5 15:31:21 sonne kernel: found 0 bytes of memory
Apr  5 15:31:21 sonne kernel: No memory ! No scanner...
Apr  5 15:31:21 sonne kernel: p48xxReadWriteTest()
Apr  5 15:31:21 sonne kernel: Found a 96003 ASIC at Reg 0x13
Apr  5 15:31:21 sonne kernel: ModelSet4830()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4830() done.
Apr  5 15:31:21 sonne kernel: p48xxDoTest()
Apr  5 15:31:21 sonne kernel: IODELAY = 1
Apr  5 15:31:21 sonne kernel: Bank 0 overwritten
Apr  5 15:31:21 sonne kernel: found 0 bytes of memory
Apr  5 15:31:21 sonne kernel: No memory ! No scanner...
Apr  5 15:31:21 sonne kernel: p48xxReadWriteTest()
Apr  5 15:31:21 sonne kernel: Found a 96003 ASIC at Reg 0x13
Apr  5 15:31:21 sonne kernel: ModelSet4830()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4830() done.
Apr  5 15:31:21 sonne kernel: p48xxDoTest()
Apr  5 15:31:21 sonne kernel: IODELAY = 2
Apr  5 15:31:21 sonne kernel: Bank 0 overwritten
Apr  5 15:31:21 sonne kernel: found 0 bytes of memory
Apr  5 15:31:21 sonne kernel: No memory ! No scanner...
Apr  5 15:31:21 sonne kernel: p48xxReadWriteTest()
Apr  5 15:31:21 sonne kernel: Found a 96003 ASIC at Reg 0x13
Apr  5 15:31:21 sonne kernel: ModelSet4830()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4830() done.
Apr  5 15:31:21 sonne kernel: p48xxDoTest()
Apr  5 15:31:21 sonne kernel: IODELAY = 3
Apr  5 15:31:21 sonne kernel: Bank 0 overwritten
Apr  5 15:31:21 sonne kernel: found 0 bytes of memory
Apr  5 15:31:21 sonne kernel: No memory ! No scanner...
Apr  5 15:31:21 sonne kernel: p48xxReadWriteTest()
Apr  5 15:31:21 sonne kernel: Found a 96003 ASIC at Reg 0x13
Apr  5 15:31:21 sonne kernel: ModelSet4830()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet4830() done.
Apr  5 15:31:21 sonne kernel: p48xxDoTest()
Apr  5 15:31:21 sonne kernel: IODELAY = 4
Apr  5 15:31:21 sonne kernel: Bank 0 overwritten
Apr  5 15:31:21 sonne kernel: found 0 bytes of memory
Apr  5 15:31:21 sonne kernel: No memory ! No scanner...
Apr  5 15:31:21 sonne kernel: detectScannerConnection() returns -9020.
Apr  5 15:31:21 sonne kernel: ************ DETECTP9636 ************
Apr  5 15:31:21 sonne kernel: ModelSet9636()
Apr  5 15:31:21 sonne kernel: ModelSet9360()
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet9630() done.
Apr  5 15:31:21 sonne kernel: modelInitPageSettings()
Apr  5 15:31:21 sonne kernel: A4 set
Apr  5 15:31:21 sonne kernel: ModelSet9636() done.
Apr  5 15:31:21 sonne kernel: P9636InitAsic()
Apr  5 15:31:21 sonne kernel: DacInitialize()
Apr  5 15:31:21 sonne kernel: ImageInitialize()
Apr  5 15:31:21 sonne kernel: IOFuncInitialize()
Apr  5 15:31:21 sonne kernel: IOInitialize()
Apr  5 15:31:21 sonne kernel: MotorInitialize()
Apr  5 15:31:21 sonne kernel: AsicID = 0x10
Apr  5 15:31:21 sonne kernel: ptdrvClose()
Apr  5 15:31:21 sonne kernel: MiscRestorePort()
Apr  5 15:31:21 sonne kernel: - no need to restore portmode !
Apr  5 15:31:21 sonne kernel: Releasing parport
Apr  5 15:31:21 sonne kernel: ptdrvShutdown()
Apr  5 15:31:21 sonne kernel: cleanup device 0
Apr  5 15:31:21 sonne kernel: Lamp-Timer stopped !
Apr  5 15:31:21 sonne kernel: Try to claim the parport
Apr  5 15:31:21 sonne kernel: Releasing parport
Apr  5 15:31:21 sonne kernel: Port unregistered
Apr  5 15:31:21 sonne kernel: pt_drv : no device(s) detected, (-9020)
Apr  5 15:31:21 sonne kernel: ---------------------------------------------

cat /proc/parport/0/autoprobe:
MODEL: Unknown vendor
MANUFACTURER:Unknown vendor
cat /proc/devices
no information about pt_drv or scanner

It is also the same problem, the lamp goes on and not more.
Andreas

I'm trying to get my Plustek OpticPro 600P scanner to work with Red hat 
Linus 7.1.
I have read that I need the driver pt_drv. I have looked every where for 
this driver but can't find it.
Can you help ?
Any instructions for loading this driver would be appriciated too.

Thanks  John

-- 
John and Sharon MacDonald
Moncton NB Canada
http://personal.nbnet.nb.ca/johnmd/family2.html 

Hi John,

goto the site
www.gjaeger.de/scanner/plustek.html and have a look at the
download section and the installation instructions. Then
it should become clear how to create pt_drv and how to install
it...

 Good luck
    Gerhard

On Saturday, 13. April 2002 16:59, John MacDonald wrote:
> I'm trying to get my Plustek OpticPro 600P scanner to work with Red hat
> Linus 7.1.
> I have read that I need the driver pt_drv. I have looked every where for
> this driver but can't find it.
> Can you help ?
> Any instructions for loading this driver would be appriciated too.
>
> Thanks  John