[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Q: Support for OpticPro 19200S ?
From: Juergen Goeritz ####@####.#### Date: 14 Jul 2000 07:09:38 -0000 Message-Id: <Pine.LNX.3.96.1000714090619.30892A-100000@redwood.oekomm.de> Hello, some days ago a Plustek Optic Pro 19200S flatbed scanner coming with a PCI SCSI-2 controller made its way to me. The optical resolution is 600 dpi with 36 bits of color. So far, I couldn't find any information about this model in the SANE webpages. Maybe it is already supported without notice? Or could I help with some testing? Any hints or help would be appreciated very much. Best regards jg -- Dipl.-Inform.(FH) Jürgen Göritz Internet http://www.oekomm.de/ Email ####@####.#### Phone +49 (0)7240 202440 Fax +49 (0)7240 202448 Mail Oekomm Vernetzungstechnik GmbH Wesebachstrasse 49a 76327 Pfinztal Germany | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Q: Support for OpticPro 19200S ?
From: "Jaeger, Gerhard" ####@####.#### Date: 14 Jul 2000 09:10:03 -0000 Message-Id: <00071411110202.23312@dagobert> On Fre, 14 Jul 2000, you wrote: > Hello, > > some days ago a Plustek Optic Pro 19200S flatbed > scanner coming with a PCI SCSI-2 controller made > its way to me. The optical resolution is 600 dpi > with 36 bits of color. > > So far, I couldn't find any information about this > model in the SANE webpages. > Maybe it is already supported without notice? > Or could I help with some testing? > > Any hints or help would be appreciated very much. Hi Juergen, currently there's no support for the Plustek SCSI scanner. The Plustek-backend and driver is only capable to control parallel port scanner. I also do not have any information about the SCSI scanner. Maybe you can have a look inside the scanner and tell me what ASICs there are inside. This may will enable us to merge current SCSI code and ASIC-control code to obtain support for the 19200S. Bye Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Q: Support for OpticPro 19200S ?
From: Juergen Goeritz ####@####.#### Date: 14 Jul 2000 09:19:39 -0000 Message-Id: <Pine.LNX.3.96.1000714112002.31588A-100000@redwood.oekomm.de> Hello Gerhard, thanks a lot for your reply. I just found out some additional information. The scanner is already in the list as a remake of an ARTEC scanner but I did only find it by chance. Would it be enough to mention it in the Plustek list and just put in a link to the sane-artec package? Best regards jg -- Dipl.-Inform.(FH) Jürgen Göritz Internet http://www.oekomm.de/ Email ####@####.#### Phone +49 (0)7240 202440 Fax +49 (0)7240 202448 Mail Oekomm Vernetzungstechnik GmbH Wesebachstrasse 49a 76327 Pfinztal Germany On Fri, 14 Jul 2000, Jaeger, Gerhard wrote: > On Fre, 14 Jul 2000, you wrote: > > Hello, > > > > some days ago a Plustek Optic Pro 19200S flatbed > > scanner coming with a PCI SCSI-2 controller made > > its way to me. The optical resolution is 600 dpi > > with 36 bits of color. > > > > So far, I couldn't find any information about this > > model in the SANE webpages. > > Maybe it is already supported without notice? > > Or could I help with some testing? > > > > Any hints or help would be appreciated very much. > > Hi Juergen, > > currently there's no support for the Plustek SCSI scanner. > The Plustek-backend and driver is only capable to control > parallel port scanner. > > I also do not have any information about the SCSI scanner. > Maybe you can have a look inside the scanner and tell me > what ASICs there are inside. This may will enable us to > merge current SCSI code and ASIC-control code to obtain > support for the 19200S. > > Bye > Gerhard > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |