plustek: Thread: error device not found 9636T

Hi everybody,

scanimage -L cannot found my scanner, I've already got problems under 
debian like systems.

These are output of
export SANE_DEBUG_PLUSTEK_PP=20 ; scanimage -L 2
I don't understand what's going wrong, if someone knows ? maybe it comes 
from parallel port device? Errors are in ASIC98001 section

Thanks in advance

[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >option warmup    30<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd 1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff   180<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for cosmetic changes, if 
the autod                                                    etection<
[plustek_pp] ># does not work or could not work correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via libieee1284<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] attach (0x378, 0xbfffca10, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name   : >0x378<
[plustek_pp] direct I/O    : yes
[plustek_pp] warmup        : 30s
[plustek_pp] lampOff       : 180
[plustek_pp] lampOffOnEnd  : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] >option warmup    30<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd 1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff   180<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] >#<
[plustek_pp] >#option warmup    -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff   -1<
[plustek_pp] attach (parport0, 0xbfffca10, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name   : >parport0<
[plustek_pp] direct I/O    : yes
[plustek_pp] warmup        : 30s
[plustek_pp] lampOff       : 180
[plustek_pp] lampOffOnEnd  : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] ptdrvInit(0)
[plustek_pp] Init settings done
[plustek_pp] ScanData = 0x08075ff8
[plustek_pp] Assigning port handle 0
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-Autodetection
[plustek_pp] ************ DETECTP48xx ************
[plustek_pp] ModelSet4800()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4800() done.
[plustek_pp] P48xxInitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] MotorInitialize()
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x7f and status=0x5f, port=0x0
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Can't find your model, asic = 0x5a
[plustek_pp] detectScannerConnection() returns -9031.
[plustek_pp] ************* ASIC9800x *************
[plustek_pp] ResetPort()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] ASIC = 0x81
[plustek_pp] ************* ASIC98001 *************
[plustek_pp] ModelSet9636()
[plustek_pp] ModelSet9360()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9630() done.
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9636() done.
[plustek_pp] P9636InitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] MotorInitialize()
[plustek_pp] 0x81
[plustek_pp] CCID = 0x00
[plustek_pp] P9636InitAsic() done.
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x7f and status=0x1f, port=0x0
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Error in memory test at pos 0 (0 != 3)
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Error in memory test at pos 0 (0 != 3)
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Error in memory test at pos 0 (0 != 3)
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Error in memory test at pos 0 (0 != 3)
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Error in memory test at pos 0 (0 != 3)
[plustek_pp] detectScannerConnection() returns -9020.
[plustek_pp] *** DETECTION DONE, result: -9020 ***
[plustek_pp] ptdrvClose()
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[plustek_pp] ptdrvShutdown()
[plustek_pp] cleanup device 0
[plustek_pp] open: PtDrvInit failed: -9020
[plustek_pp] open failed: -1
[plustek_pp] sane_get_devices (0xbfffead8, 0)

On Wednesday 26 January 2005 02:33, Nicolas DELY wrote:
> Hi everybody,
> 
> scanimage -L cannot found my scanner, I've already got problems under 
> debian like systems.
> 
> These are output of
> export SANE_DEBUG_PLUSTEK_PP=20 ; scanimage -L 2
> I don't understand what's going wrong, if someone knows ? maybe it comes 
> from parallel port device? Errors are in ASIC98001 section
> 
> Thanks in advance
> 
> [plustek_pp] >[direct]<
> [plustek_pp] >device 0x378<
> [plustek_pp] Decoding device name >0x378<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># leave the default values as specified in /etc/modules.conf<
> [plustek_pp] >#<
> [plustek_pp] >option warmup    30<
> [plustek_pp] Decoding option >warmup<
> [plustek_pp] >option lOffOnEnd 1<
> [plustek_pp] Decoding option >lOffOnEnd<
> [plustek_pp] >option lampOff   180<
> [plustek_pp] Decoding option >lampOff<
> [plustek_pp] ><
> [plustek_pp] ># model override switch, mostly for cosmetic changes, if 
> the autod                                                    etection<
> [plustek_pp] ># does not work or could not work correctly<
> [plustek_pp] >#option mov 7<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner via libieee1284<
> [plustek_pp] >#<
> [plustek_pp] >[direct]<
> [plustek_pp] attach (0x378, 0xbfffca10, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name   : >0x378<
> [plustek_pp] direct I/O    : yes
> [plustek_pp] warmup        : 30s
> [plustek_pp] lampOff       : 180
> [plustek_pp] lampOffOnEnd  : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] open: PtDrvInit failed: 4
> [plustek_pp] open failed: -1
> [plustek_pp] >device parport0<
> [plustek_pp] Decoding device name >parport0<
> [plustek_pp] >option warmup    30<
> [plustek_pp] Decoding option >warmup<
> [plustek_pp] >option lOffOnEnd 1<
> [plustek_pp] Decoding option >lOffOnEnd<
> [plustek_pp] >option lampOff   180<
> [plustek_pp] Decoding option >lampOff<
> [plustek_pp] ><
> [plustek_pp] >#<
> [plustek_pp] ># example for accessing the scanner via the kernel module<
> [plustek_pp] >#<
> [plustek_pp] >#[kernel]<
> [plustek_pp] >#device /dev/pt_drv<
> [plustek_pp] >#<
> [plustek_pp] >#option warmup    -1<
> [plustek_pp] >#option lOffOnEnd -1<
> [plustek_pp] >#option lampOff   -1<
> [plustek_pp] attach (parport0, 0xbfffca10, (nil))
> [plustek_pp] Device configuration:
> [plustek_pp] device name   : >parport0<
> [plustek_pp] direct I/O    : yes
> [plustek_pp] warmup        : 30s
> [plustek_pp] lampOff       : 180
> [plustek_pp] lampOffOnEnd  : yes
> [plustek_pp] model override: 0
> [plustek_pp] ---------------------
> [plustek_pp] drvopen()
> [plustek_pp] ptdrvInit(0)
> [plustek_pp] Init settings done
> [plustek_pp] ScanData = 0x08075ff8
> [plustek_pp] Assigning port handle 0
> [plustek_pp] ptdrvOpen(port=0x0)
> [plustek_pp] Try to claim the parport
> [plustek_pp] Setting SPP-mode
> [plustek_pp] Setting PS/2-mode
> [plustek_pp] We're using libIEEE1284 I/O
> [plustek_pp] Starting Scanner-Autodetection
> [plustek_pp] ************ DETECTP48xx ************
> [plustek_pp] ModelSet4800()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet4800() done.
> [plustek_pp] P48xxInitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnBiDirRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x7f and status=0x5f, port=0x0
> [plustek_pp] p48xxReadWriteTest()
> [plustek_pp] Can't find your model, asic = 0x5a
> [plustek_pp] detectScannerConnection() returns -9031.
> [plustek_pp] ************* ASIC9800x *************
> [plustek_pp] ResetPort()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnBiDirRead<
> [plustek_pp] ASIC = 0x81
> [plustek_pp] ************* ASIC98001 *************
> [plustek_pp] ModelSet9636()
> [plustek_pp] ModelSet9360()
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9630() done.
> [plustek_pp] modelInitPageSettings()
> [plustek_pp] A4 set
> [plustek_pp] ModelSet9636() done.
> [plustek_pp] P9636InitAsic()
> [plustek_pp] DacInitialize()
> [plustek_pp] ImageInitialize()
> [plustek_pp] IOFuncInitialize()
> [plustek_pp] IOInitialize()
> [plustek_pp] * using readfunction >fnBiDirRead<
> [plustek_pp] MotorInitialize()
> [plustek_pp] 0x81
> [plustek_pp] CCID = 0x00
> [plustek_pp] P9636InitAsic() done.
> [plustek_pp] ResetPort()
> [plustek_pp] Test 0x55
> [plustek_pp] Test 0xAA
> [plustek_pp] Compare data=0x7f and status=0x1f, port=0x0
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Error in memory test at pos 0 (0 != 3)
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Error in memory test at pos 0 (0 != 3)
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Error in memory test at pos 0 (0 != 3)
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Error in memory test at pos 0 (0 != 3)
> [plustek_pp] ioP98ReadWriteTest()
> [plustek_pp] Error in memory test at pos 0 (0 != 3)
> [plustek_pp] detectScannerConnection() returns -9020.
> [plustek_pp] *** DETECTION DONE, result: -9020 ***
> [plustek_pp] ptdrvClose()
> [plustek_pp] MiscRestorePort()
> [plustek_pp] Releasing parport
> [plustek_pp] ptdrvShutdown()
> [plustek_pp] cleanup device 0
> [plustek_pp] open: PtDrvInit failed: -9020
> [plustek_pp] open failed: -1
> [plustek_pp] sane_get_devices (0xbfffead8, 0)
> 
Hi,

you should try and set your port in BIOS to EPP, no ECP at all!!!
Then also try and set the parport_pc module parameters correctly:
options parport_pc io=0x378 irq=none
(assuming the port is located at 0x378)
If this doesn't help, try and set the port to plain SPP.
It seems, that you have one of these boards, where the auto-setup
of the parport_pc module didn't work correctly.

Hope this helps
Gerhard