[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Colorado Direct 9600
From: Malc ####@####.#### Date: 20 May 1999 21:29:31 -0000 Message-Id: <37448B53.775D3514@cyberserf.free-online.net> I have read Cai and Christian's contributions to the mailing list, and I too am trying to get the Colorado Direct 9600 to work with Linux. If I can be of any help testing/debugging any code, please let me know. ( I can provide the DBG_ALL output from the 0.2 driver when running against the Col.Dir.9600 if that would help?) Out of interest, I wrote to Primax regarding Linux support before I found your project. They told me that the specs were a 'company secret' and would not be released. Now I read on this mailing list that an NDA is under discussion - what is the status of the NDA? Will it help to reply to Primax in support of them creating an NDA with yourselves? Congratulations on your work so far, Kep up the good work! Malc. __ ####@####.#### - 'proper' coder by day - linux hacker by night ;-) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Colorado Direct 9600
From: Marco Foglia ####@####.#### Date: 20 May 1999 22:02:56 -0000 Message-Id: <37448570.B89D1B38@physik.unizh.ch> Malc wrote: > If I can be of any help testing/debugging any code, please let me > know. ( I can provide the DBG_ALL output from the 0.2 driver when > running against the Col.Dir.9600 if that would help?) Don't waste your time and wait until we have checked our code with the original Primax specs (see below). > Now I read on this mailing list that an NDA is under discussion > what is the status of the NDA? > Will it help to reply to Primax in support of them creating an > NDA with yourselves? You don't have to write to Primax anymore. Primax has promised to send the NDA tomorrow. After signing it, we will get the specs for the newest and the oldest Colorado Direct models. Short remark: The NDA will be for the document containing the specs. The source code will be open and free. Marco | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Colorado Direct 9600
From: Danilo Godec ####@####.#### Date: 20 May 1999 22:26:31 -0000 Message-Id: <Pine.LNX.3.95.990521001818.21353B-100000@server.kibla.org> On Thu, 20 May 1999, Marco Foglia wrote: > You don't have to write to Primax anymore. Primax has promised to > send the NDA tomorrow. After signing it, we will get the specs > for the newest and the oldest Colorado Direct models. > > Short remark: The NDA will be for the document containing the > specs. The source code will be open and free. Hopefully this specs will include other Primax scanners (4800 Direct). :) D. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Colorado Direct 9600
From: Nivet Anthony ####@####.#### Date: 8 Aug 2002 22:44:38 -0000 Message-Id: <20020809003022.5af23ced.anivet@nerim.net> Hello :) I have a very big problem : I use pxscan driver and primaxgui, and I have this message : -------------------------------------------------- Failed Intel bug check. (Phony EPP in ECP) This Port does not support the EPP-Mode Please activate EPP-Mode or ECP-Mode with included EPP-mode! The activated and detected Modis are: SPP-Port present ECP-Port present -------------------------------------------------- But my Bios configure with [EPP+ECP] I don't understand ! Please, help me Thanks :) PS: sorry for my english, but I'm French. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Fwd: Re: Colorado Direct 9600
From: Christian Ordig ####@####.#### Date: 9 Aug 2002 00:49:33 -0000 Message-Id: <20020809022747.B23540@odin.chris.com> I answered directly, ... here the version for the mailing list again .-) -- Christian Ordig Germany On Fri, Aug 09, 2002 at 12:30:22AM +0200, Nivet Anthony wrote: > This Port does not support the EPP-Mode > Please activate EPP-Mode or > ECP-Mode with included EPP-mode! > > The activated and detected Modis are: > SPP-Port present > ECP-Port present > -------------------------------------------------- > > But my Bios configure with [EPP+ECP] I had the same problem with a Gigabyte Board with Intel BX Chipset. I had to switch to EPP only (!) in the BIOS and everything is fine. EPP 1.7 or 1.9 shouldn't matter. With my newer ECS Dual Board EPP 1.9 works better. -- Christian Ordig Germany | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Colorado Direct 9600
From: Michal KOSTRZEWA ####@####.#### Date: 9 Aug 2002 16:42:12 -0000 Message-Id: <Pine.SOL.4.30.0208091822360.12881-100000@mion.elka.pw.edu.pl> Hello, That reminds me, that I've submitted a patch which could help (I have had exactly the same situation). I think, Christian Ordig sent me an email saying that it'll be published when he has some spare time. What about that? :-) best regards, Michal Kostrzewa | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Colorado Direct 9600
From: Christian Ordig ####@####.#### Date: 9 Aug 2002 17:18:45 -0000 Message-Id: <20020809185702.B7858@odin.chris.com> On Fri, Aug 09, 2002 at 06:27:39PM +0200, Michal KOSTRZEWA wrote: > Hello, > > That reminds me, that I've submitted a patch which could help (I have had > exactly the same situation). I think, Christian Ordig sent me an email > saying that it'll be published when he has some spare time. What about > that? :-) yes ... I still have it on my ToDo list :-) ... hadn't time to try it out, yet. It was about the Cheating parallel port stuff and saving/loading calibration data, but in the primax_scan driver, not the pxscan, but it shouldn't be too difficult to port the port cheating code ... or simply set it to EPP in the BIOS ;-) -- Christian Ordig Germany | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Colorado Direct 9600
From: Michal KOSTRZEWA ####@####.#### Date: 9 Aug 2002 19:21:26 -0000 Message-Id: <Pine.SOL.4.30.0208092101550.25280-100000@mion.elka.pw.edu.pl> > it shouldn't be too difficult to port the port cheating code ... or > simply set it to EPP in the BIOS ;-) The worst is, setting EPP in the BIOS isn't good solution for some cases. For example I have dual boot Linux/Windows, and my beautiful scanner simply doesn't work under Windows when EPP is set... Switching to BIOS wherever I want to boot Linux/Win is rather annoing. I believe, some applications under Linux work better when in ECP mode... I wish you more free time :-) happy holidays! Michal Kostrzewa | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |