nanogui: USB Mouse Support on Embedded Device
Subject:
RE: [nanogui] USB Mouse Support on Embedded Device
From:
"Martin Kajdas" ####@####.####
Date:
26 Sep 2006 16:16:43 +0100
Message-Id: <CF2BB830A62F914F848E5AD5FFF57AC2291566@mkmail.MKPROD.COM>
You need some kind of device driver that will work with your keyboard so it can be recognized by the kernel.
First, try to compile the kernel to support a USB keyboard and enable all USB required options.
Is your keyboard recognized and working with the kernel?
Can you use it to enter commands to linux? You need to get this working first.
Martin
-----Original Message-----
From: NaveenYadav ####@####.####
Sent: Tuesday, September 26, 2006 2:55 AM
To: Martin Kajdas
Cc: ####@####.####
Subject: Re: [nanogui] USB Mouse Support on Embedded Device
> Hi Martin ,
>
> I am running MIPS Board , and want to use USB Keyboard also.
> Can you tell me on Nano-x whick keyBoard i need to Enable .
On Target Board when I attach USB KEYBoard and check /dev/interrupts it is
getting incremented each time i hit on keyboard...
Regards
Naveen
>
>
> Regards
> Naveen
> ----- Original Message -----
> From: "NaveenYadav" ####@####.####
> To: "Martin Kajdas" ####@####.####
> Cc: ####@####.####
> Sent: Friday, September 22, 2006 8:20 AM
> Subject: Re: [nanogui] USB Mouse Support on Embedded Device
>
>
> > Thanks ,
> > I Fix the problem, I need to modify mou_ser.c and give correct Device
> > Open"".
> >
> > Thanks a lot..
> >
> > Have a nice week end
> > Naveen
> > ----- Original Message -----
> > From: "Martin Kajdas" ####@####.####
> > To: "NaveenYadav" ####@####.####
> > Cc: ####@####.####
> > Sent: Thursday, September 21, 2006 8:25 PM
> > Subject: RE: [nanogui] USB Mouse Support on Embedded Device
> >
> >
> > The reason is that nano-X is configured (compiled) to look for
/dev/psaux
> > mouse and if it is not there you get this error.
> > You need to link /dev/psaux to where the mouse device is.
> >
> > Martin
> >
> >
> > -----Original Message-----
> > From: NaveenYadav ####@####.####
> > Sent: Wednesday, September 20, 2006 9:30 PM
> > To: ####@####.####
> > Subject: [nanogui] USB Mouse Support on Embedded Device
> >
> >
> > Hi ,
> >
> > I am using Nano-x On Embedded System . I want USB Mouse Support , I
> Compiled
> > Kernel and It able to Detect Mouse . But When I run Nano-x Server, i Got
> > Error
> > "Error 2 opening serial mouse type ps2 on port /dev/psaux
> >
> > What may be the reason
> >
> > Best Regards
> > Naveen
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: ####@####.####
> > For additional commands, e-mail: ####@####.####
> >
> >
> >
>
