nanogui: USB Mouse Support on Embedded Device
Subject:
RE: [nanogui] USB Mouse Support on Embedded Device
From:
"Martin Kajdas" ####@####.####
Date:
28 Sep 2006 16:32:46 +0100
Message-Id: <CF2BB830A62F914F848E5AD5FFF57AC229156A@mkmail.MKPROD.COM>
On my system I have a /dev/console which is then linked with /dev/tty, /dev/tty0, /dev/tty1, /dev/tty5.
This is what my Linux setup is using and nano-X talks to Linux kernel.
Once you have you keyboard working with linux, then it should work or you will need some links to make it work
Martin
-----Original Message-----
From: NaveenYadav ####@####.####
Sent: Tuesday, September 26, 2006 7:51 PM
To: Martin Kajdas
Cc: ####@####.####
Subject: Re: [nanogui] USB Mouse Support on Embedded Device
Hi Martin,
I Am able to configure Kernel and device file is /dev/usb/hid/hiddev0 ,
Which Device driver i should use for Nano-x ....
Naveen
----- Original Message -----
From: "Martin Kajdas" ####@####.####
To: "NaveenYadav" ####@####.####
Cc: ####@####.####
Sent: Tuesday, September 26, 2006 8:46 PM
Subject: RE: [nanogui] USB Mouse Support on Embedded Device
You need some kind of device driver that will work with your keyboard so it
can be recognized by the kernel.
First, try to compile the kernel to support a USB keyboard and enable all
USB required options.
Is your keyboard recognized and working with the kernel?
Can you use it to enter commands to linux? You need to get this working
first.
Martin
-----Original Message-----
From: NaveenYadav ####@####.####
Sent: Tuesday, September 26, 2006 2:55 AM
To: Martin Kajdas
Cc: ####@####.####
Subject: Re: [nanogui] USB Mouse Support on Embedded Device
> Hi Martin ,
>
> I am running MIPS Board , and want to use USB Keyboard also.
> Can you tell me on Nano-x whick keyBoard i need to Enable .
On Target Board when I attach USB KEYBoard and check /dev/interrupts it is
getting incremented each time i hit on keyboard...
Regards
Naveen
