nanogui: Arc drawing not working
Subject:
Arc drawing not working
From:
"Martin Kajdas" ####@####.####
Date:
29 Oct 2007 15:13:05 +0000
Message-Id: <CF2BB830A62F914F848E5AD5FFF57AC24F992D@mkmail.MKPROD.COM>
I have the latest CVS nano-X and nxlib and there is still a problem with
arc drawing.
I have a FLTK program that links with nxlib and runs on nano-X and arc
draw is the only problem now.
For me, it seems that the arcs 174-178 deg and 182-186 are either drawn
as a full circle or not at all (can't remember which is which now).
The same program works fine on X11.
I know that there was a problem with arcs around 180 deg but my arcs are
a few degrees away from 180, and arcs around 180 work fine.
Larger arcs also work fine, it occurs only for small arcs (4-5 degrees)
close to 180 (2-3 deg) but not crossing 180.
Anyone has any ideas where to look or what to do?
Martin
