nanogui: Microwindows on VTech Helio
Subject:
Re: Microwindows on VTech Helio
From:
"CCYau" ####@####.####
Date:
29 Sep 2000 08:07:23 -0000
Message-Id: <001e01c02a51$22120de0$c47068ca@server>
Greg,
Yes, the ioctl give out the error code 25, from asm/errno, it was NOTTY
error. Then, I have replaced the procedure code of PD_Read of mou_tp.c from
mou_ts.c, the cursor moving! But the positioning was wrong, just inversed:
when I move the pen on panel up, the cursor goes down, etc. Seems some
coordination problem.
Regarding mou_tp.c, is that a tailor make version is needed? So some of
the parameter should be adjust for the Helio?
Thanks
CC
----- Original Message -----
From: Greg Haerr ####@####.####
To: CCYau ####@####.#### ####@####.####
Sent: Friday, September 29, 2000 1:14 PM
Subject: Re: Microwindows on VTech Helio
> : Yes, I'm using TPMOUSE and mou_tp.c of 0.89 now. It can shown up a
> : cursor on screen.
> : If I run nano-X, I can get this error:
> : Error -1 result 25 setting scan parameter
> : Then, when I touch the touch panel, there will be:
> : Gderror: mouse error
> : Gderror: mouse error
>
> I am not doing the work for the VTech Helio port
> of Microwindows, so I don't really know what the
> problem is. Looking at the src, it looks like
> the ioctl for TPSETSCANPARM isn't working.
>
> Perhaps Vladimir or Eric could respond to this:
> Are you using the standard mou_tp.c driver for
> the Vtech?
>
> Regards,
>
> Greg
>
>
>
>
>
> : .....
> : Please help.
> : Thanks
> : CC
> :
> : ----- Original Message -----
> : From: Greg Haerr ####@####.####
> : To: CCYau ####@####.#### ####@####.####
> : Sent: Friday, September 29, 2000 11:04 AM
> : Subject: Re: Microwindows on VTech Helio
> :
> :
> : >
> : > 6) The Nano-X windows display up, the nclock ticking.
> : > This is really COOL !
> : >
> : > I'm glad you like it.
> : >
> : >
> : > However, I still can't bring the touch panel to work as mouse. The
file
> : mou_ts.c
> : > was no longer exist in 0.89. Can someone offer help?
> : >
> : > The mou_ts.c was renamed mou_ads.c and mou_ipaq.c in
> : > 0.89pre1 to be less confusing. The MIPS VR kernel works
> : > with the /dev/tpanel kernel driver (char special 10,11)
> : > and uses the Microwindows mou_tp.c which is set
> : > using TPMOUSE in the config file. Please read
> : > the mou_tp.c file for more info.
> : >
> : > Regards,
> : >
> : > Greg
> : >
> : >
> :
> :
> : ---------------------------------------------------------------------
> : To unsubscribe, e-mail: ####@####.####
> : For additional commands, e-mail: ####@####.####
> :
> :
>
