nanogui: Cannot Compile 0.89pre5
Subject:
Re: Cannot Compile 0.89pre5
From:
Jaswinder Singh ####@####.####
Date:
1 Dec 2000 01:22:16 -0000
Message-Id: <20001201012504.5765.qmail@web4005.mail.yahoo.com>
Dear Ibrahim and Greg,
--- Ibrahim Shaame ####@####.#### wrote:
> Thanks for the tips. Unfortunately that what's I did
> to start with and
> it did not work. I tried both the original config
> and config.svga.
But compilation of microwindows is not a problem
atleast for native window , please check your gcc .
And do one thing in config file :-
set
VERBOSE = Y
for seeing what happen .
there is some problem in microwindows during make , if
some error occurs it does not quit , Dear Greg , can
you please fix it.
>As
> for version 0.89pre6, it looks bigger to fit in one
> 3.5" Floppy (I
> download under Window$ at work, where, of course,
> dowload speed is
> faster than my 56K modem at home).
>
As Dear Greg and Olaf Meeuwissen already gave you some
hints .
But if you face any problem , please download
fsplit2x.exe from :-
http://softseek.zdnet.com/Utilities/File_Management/File_Splitting/D_6416_index.html
This is for Windows system but for 30 days trial :-)
If you want to use bzip2 in windows then download
UnxUtils.zip from :-
http://softseek.zdnet.com/Utilities/General/D_31217_index.html
This is free , enjoy.
Best Regards,
Jaswinder.
> Any suggestions ?
>
> Thanks
>
> Ibrahim
>
> Jaswinder Singh wrote:
>
> > Dear Shaame,
> >
> > --- Ibrahim Shaame ####@####.#### wrote:
> > > Hi all,
> >
> > Hi
> >
> > > I am just new and have decided to try
> > > microwindows
> > > on my old linux box, but have been unable to
> > > compile.
> > > My configuration is: DX2-66, a vga card with
> 1MB,
> > > Slackware linux 4.0 with gcc-2.7.2.3
> > > I want to use it running native linux and
> nano-x. I
> > > have used the supplied "config.svga", but when I
> > > compile I get "no rule to make ../libnano-X.a"
> and
> > > it
> > > ends with:
> > > make [2] *** [Subdirs]Error 2
> > > make [1] *** [Subdirs]Error 2
> > > make *** [All]Error 2
> > >
> >
> > Have you made any changes in microwin/src
> directory ?
> >
> > First of all please compile
> > microwindows-0.89pre5.tar.gz as it is by :-
> >
> > gzip -dc microwindows-0.89pre5.tar.gz | tar xf -
> > cd microwin/src
> > make
> >
> > and then
> >
> > copy config.svga config
> > make
> >
> > if this works well then start make changes as per
> your
> > requirement.
> >
> > Hope this works.
> >
> > BTW , microwindows-0.89pre6.tar.gz is also
> available
> > better you use microwindows-0.89pre6.tar.gz .
> >
> > Best Regards,
> >
> > Jaswinder.
> >
> > > Please help
> > >
> > > I. Shaame
> > >
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
