Subject:
Re: Problem running demos when using Framebuffer option
From:
Supriyo ####@####.####
Date:
7 Dec 2000 08:12:14 -0000
Message-Id: <20001207081508.22435.qmail@web4403.mail.yahoo.com>
Hi all,
I tried the "brain dead" VGA16 mode as Greg suggested
and everything worked fine.....until I ran "mdemo"
from the microwin/src/bin/ directory. The whole
monitor just went blank and couple of seconds later
out popped a message (generated my the monitor)
saying:
Out of Scan Range
Well...I'm attaching a few files which might hold
clues as to why my PC refuses to do what I want it to
do!
1) .config: generated by Menuconfig (only included a
small portion of the file)
2) config: Microwindows config file (only included a
small portion of the file)
3) dmesg.txt: what I got when I typed dmesg
4) lilo.conf: Below:
oot=/dev/hda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
linear
default=dos
image=/boot/vmlinuz
label=linux
read-only
root=/dev/hda5
image=/boot/vmlinuz.old
label=linux_old
read-only
root=/dev/hda5
other=/dev/hda1
label=dos
Please let me know if you find anything suspicious in
the files.
Thanks!
Supriyo
--------------------------------------------------------------------------------
#
# Automatically generated by make menuconfig: don't
edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Mice
#
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_VGA16=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
CONFIG_FBCON_VGA_PLANES=y
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
--------------------------------------------------------------------------------
####################################################################
#
# build target platform
#
# Valid ARCH values are:
#
# LINUX-NATIVE
# LINUX-ARM
# LINUX-MIPS
# LINUX-POWERPC
# FREEBSD-X86
# SOLARIS
# RTEMS
# DJGPP
# ELKS
#
# note: ELKS can't build client/server nano-X, nor
widget lib
#
####################################################################
ARCH = LINUX-NATIVE
ARMTOOLSPREFIX = arm-linux-
MIPSTOOLSPREFIX = mipsel-linux-
POWERPCTOOLSPREFIX = powerpc-linux-
RTEMSTOOLSPREFIX = i386-rtemself-
####################################################################
#
# Compiling options
#
####################################################################
OPTIMIZE = Y
DEBUG = N
VERBOSE = N
####################################################################
#
# Libraries to build: microwin, nano-X, nanowidget,
object frameworks
#
####################################################################
MICROWIN = Y
NANOX = Y
SHAREDLIBS = N
NWIDGET = Y
OBJFRAMEWORK = N
####################################################################
#
# Demos to build
#
####################################################################
MICROWINDEMO = Y
NANOXDEMO = Y
####################################################################
#
# Applications to build
#
####################################################################
NANOWM = Y
####################################################################
#
# The pixeltype of the native hardware or underlying
graphics library.
# This definition defines the PIXELVAL to be 32, 16 or
8 bits wide.
# If using Linux framebuffer, set to
MWPF_TRUECOLOR0888, and use fbset.
# It also enables GdArea/GrArea for this particular
pixel packing
format.
#
# define MWPF_PALETTE /* pixel is packed 8 bits
1, 4 or 8 pal
index*/
# define MWPF_TRUECOLOR0888 /* pixel is packed 32 bits
8/8/8
truecolor*/
# define MWPF_TRUECOLOR888 /* pixel is packed 24 bits
8/8/8
truecolor*/
# define MWPF_TRUECOLOR565 /* pixel is packed 16 bits
5/6/5
truecolor*/
# define MWPF_TRUECOLOR332 /* pixel is packed 8 bits
3/3/2 truecolor*/
#
####################################################################
SCREEN_PIXTYPE = MWPF_TRUECOLOR0888
####################################################################
#
# NanoX: Put Y to the following line to link the
nano-X application
# with the server. This is required for ELKS, if no
network is
present,
# or for speed or debugging. This affects the nano-X
server only.
#
####################################################################
LINK_APP_INTO_SERVER = N
####################################################################
#
# File I/O support
# Supporting either below drags in libc stdio, which
may not be wanted
#
####################################################################
HAVE_FILEIO = Y
####################################################################
# BMP, GIF reading support
####################################################################
HAVE_BMP_SUPPORT = Y
HAVE_GIF_SUPPORT = Y
HAVE_XPM_SUPPORT = Y
####################################################################
# Shared memory support for Nano-X client/server
protocol speedup
####################################################################
HAVE_SHAREDMEM_SUPPORT = N
####################################################################
# Generate screen driver interface only with no fonts
or clipping
####################################################################
NOFONTSORCLIPPING = N
####################################################################
#
# Window move algorithms for Microwindows
# Change for tradeoff between cpu speed and looks
# ERASEMOVE repaints only backgrounds while window
dragging, quicker.
# Otherwise an XOR redraw is used for window moves
only after button
up,
# quickest (should set for ELKS)
# UPDATEREGIONS paints in update clipping region only
for better look
and feel
#
####################################################################
ERASEMOVE = Y
UPDATEREGIONS = Y
####################################################################
#
# Link with Gray Palette (valid only for 4bpp modes)
#
####################################################################
GRAYPALETTE = N
####################################################################
#
# If the platform is running UNIX, Linux or RTEMS...
#
####################################################################
ifneq ($(ARCH), ELKS)
# X Window screen, mouse and kbd drivers
X11 = N
ifeq ($(X11), Y)
# predefined model or select screen width, height,
depth(palette mode
only)
SCREEN_E15 = N
SCREEN_WIDTH = 640
SCREEN_HEIGHT = 480
SCREEN_DEPTH = 4
else
# framebuffer screen driver (linear and/or vga 4
planes)
# set VTSWITCH to include virtual terminal switch code
# set PORTRAIT_MODE to L or R for left or right
orientation
# set FBREVERSE to reverse bit orders in 1,2,4 bpp
# set FBVGA=N for all systems without VGA hardware
(for MIPS must=N)
FRAMEBUFFER = Y
FBVGA = Y
VTSWITCH = Y
PORTRAIT_MODE = N
FBREVERSE = N
# svgalib screen driver
VGALIB = N
# direct VGA hardware access screen driver
HWVGA = N
--------------------------------------------------------------------------------
Linux version 2.2.14-5.0old
####@####.#### (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #6
Thu Dec 7 13:35:06
SGT 2000
Detected 348934745 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 348.16 BogoMIPS
Memory: 127884k/131072k available (1104k kernel code,
412k reserved,
1608k data, 64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 131072 (order 7,
512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception
16 error
reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch
####@####.####
PCI: PCI BIOS revision 2.10 entry at 0xfcaee
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society
NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT
SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K
size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings:
hdc:DMA, hdd:pio
hda: ST310212A, ATA DISK drive
hdc: NEC CD-ROM DRIVE:28B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST310212A, 9768MB w/512kB Cache, CHS=1245/255/63
hdc: ATAPI 32X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum
routines
pII_mmx : 808.863 MB/sec
p5_mmx : 858.393 MB/sec
8regs : 598.932 MB/sec
32regs : 306.705 MB/sec
using fastest function: p5_mmx (858.393 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 208804k swap-space (priority -1)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
__________________________________________________
Do You Yahoo!?
Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com.sg/
