nanogui: Trouble building Microwindows for MIPS target
Subject:
Re: Trouble building Microwindows for MIPS target
From:
Jun Sun ####@####.####
Date:
13 Feb 2001 23:02:40 -0000
Message-Id: <3A89BD1D.CB1585DE@mvista.com>
Scott A McConnell wrote:
>
> John Waldron wrote:
>
> > I can't imagine that floating point would have anything to do with it (but I
> > may be wrong). Are you building on the osprey board?
>
> No I am targeting a proprietary board that has a NEC VR5452 MIPS processor. I
> have the frame buffer working. I have a console on the FB and several
> standalone apps that use the fb.
>
Scott,
Your missing fb header problem is due to improper installation of toolchain.
I would remove the existing stuff and re-install them.
> > There could be some
> > other enhancements in the new tools that would fix this, but it sounds like
> > a config issue.
>
> I have attached my config file. Maybe you can see something wrong.
>
> > Are you sure all your enviroment vars point to the correct places?
>
> I listed all the values that I thought might be relevant in a prior e-mail.
>
> > Are you sure you are using the correct .config file in the uWin make?
>
> I compared my config to config.harrier and config.helio.
> I did not see any significant differences.
>
> I am also getting errors like:
>
You need to modify Arch.rules in mwin. Remove the soft-float compile option.
Jun