Subject:
RE: Is there chinese input mechod for microwindow?
From:
"Jim Shiu" ####@####.####
Date:
8 May 2001 09:05:43 -0000
Message-Id: <005101c0d79d$a5e41740$7201a8c0@shiu>
Dear Jacky,
Sorry that I did not notice that you are
using TTYKBD. Our IME implementation
expects SCANKBD.
By the way, we ourselves have tested FB as the
display driver. However, we expect that X11 as
display driver will also work.
Jim Shiu,
Setabox Technology Corp.
9F-1, No. 293-3, Sec. 2, Fu-Hsing S. Rd.,
Taipei, Taiwan
-----Original Message-----
From: jacky ####@####.####
Sent: Monday, May 07, 2001 2:39 PM
To: ####@####.#### ####@####.####
Subject: Re: Is there chinese input mechod for microwindow?
i have maked it and "make install" have been done.
but the problem is still in here.
and i am sure the the NANOX_IME_PATH is right.
-------------
Your jacky
----- Original Message -----
From: "Jim Shiu" ####@####.####
To: "'jacky'" ####@####.#### ####@####.####
Sent: Monday, April 30, 2001 6:33 PM
Subject: RE: Is there chinese input mechod for microwindow?
>
> Have you "make" and "make install" ?
> "make install" will copy compiled binaries to their places.
> Also NANOX_IME_PATH should be defined accordingly.
>
> Regards,
>
> Jim Shiu
> Setabox Technology Corp.
> 9F-1, No. 293-3, Sec. 2, Fu-Hsing S. Rd.,
> Taipei, Taiwan
>
>
> -----Original Message-----
> From: jacky ####@####.####
> Sent: Saturday, April 28, 2001 8:53 AM
> To: ####@####.#### ####@####.####
> Subject: Re: Is there chinese input mechod for microwindow?
>
>
> yes, in order to run "ime" i use two ways
> 1: i use "./ime" but the progress say "Segmentation fault (core dumped)"
> 2: in demo1 i press Ctrl-space, i can not see any now windows was display.
>
> ----- Original Message -----
> From: "Jim Shiu" ####@####.####
> To: "'jacky'" ####@####.#### ####@####.####
> Sent: Friday, April 27, 2001 6:31 PM
> Subject: RE: Is there chinese input mechod for microwindow?
>
>
> > Dear Jacky,
> >
> > In our README, we mentioned that "In demo1, if you can
> > see a new window when you press Ctrl-Space, your installation
> > is successful".
> >
> > I am not sure what you mean for "... when i RUN ime ...".
> > Does "RUN" means "press Ctrl-Space" ?
> >
> > Best Regards,
> >
> > Jim Shiu
> > Setabox Technology Corp.
> >
> > -----Original Message-----
> > From: ####@####.#### ####@####.####
> Behalf Of jacky
> > Sent: Friday, April 27, 2001 3:52 PM
> > To: ####@####.#### ####@####.####
> > Subject: RE: Is there chinese input mechod for microwindow?
> >
> >
> > just now.i check the all output informat of making microwindows.
> > but i find there are no any warrning about the patch files.
> > i am sure that i have download the microwin ,font and patch files well.
> > i list my platform again and more deatil.
> > rh6.2 in i686
> > gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 releasen)
> > microwindows 0.89pre7
> > microwindows chinese font 0.89pre2
> > tha demos used server and client mode.
> > get the tests of naonx but no windows API demos.
> > X11 is microwindows display driver.
> > tty is microwindows kbd driver.
> > and NANOX_IME_PATH have set the value which it is should be.
> > i am add the BIG support.
> > at last i will say that when i run ime i get
> > Segmentation fault (core dumped)
> > if there are still no enough information to reslove the problem, i can
> > mail you the core-file, config-file and the output information of making
> > microwindows
> >
> > many thank!
> > --
> > your jacky
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
